12V UCS2904 RGBW 60 Leds pixel strip

Led Pixel Tape Leave a comment 1676 Views

1. 12V UCS2904 RGBW 60 Leds pixel strip

2. DC12V, 19W/M

3. 10mm width White /Black FPCB

4. 3 leds per segment on 10mm width PCB board

5. 60 pcs RGBW LED plus 20 pcs UCS2904 IC chip

6. 16 bits dimming curve UCS8904 IC is available

7. 2pin / 3pin JST-SM connector

8. 3M adhesive tape on backside of non-waterproof tape

9. Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

Color

RGBW

Pixel

3 led/pixel

Protocol

SPI

Voltage

12V

Inquiry

More Details.

This strip is 12V UCS2904 4 channel RGBW 60 led digital strips that different with DMX512 RGBW led pixel strips. Actually the protocol is compatible with SK6812 RGBW led tape.
Compared to the integrated SK6812 RGBW ones, this external IC chip 12V UCS2904 RGBW 60 LED strip has much higher brightness and much stability.
Its advantage is this UCS2904 RGBW digital led strip can play pure white color compared to that classicial WS2811 RGB led strip couldn’t.
There are Warm white 2300K, 2700K, Neutral White 4500K, Cold white 6500K white CCT to choose.
UCS2904 is 8 bits dimming. If you need more smooth, 16 bits dimming UCS8904 is recommended to choose.
Entire strip has 20 pixels ( 80 channels), 60 pcs RGBW leds in a meter with 10mm width pcb board.
The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every 3 LED. Solder to the 0.1" copper pads and you're good to go.

7. If the 12V UCS2904 RGBW pixel led strip does get damaged, it is often one pixel copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

8. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.