5mm width Addressable 144 Leds RGB Pixel LED tape RGB

1. 5mm width Addressable 144 leds RGB Pixel LED strip

2. DC5V, 14W/M

3. 5mm width White /Black FPCB

4. 2pin / 3pin JST-SM connector

5. 3M adhesive tape on backside of non-waterproof tape

6. Neopixel Nano SK6805 2427 RGB LEDs

7.Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

Color

RGB

Pixel

Addressable

Protocol

SPI

Voltage

5V

More Details.

1. This 5mm width Addressable 144 leds RGB Pixel LED strip are incredibly cool that each led is powered by a sk6805 led that enables them to be individually addressable on only 5mm width FPCB. 

2. We choose SK6805 2427 RGB LED which it is an intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 2427 components.

3. The SK6805 2427 LEDs are controlled by shift-registers that are chained up and down the tape so you can shorten or lengthen the tape.

4. SK6805 2427 RGB LED is single digital out pin ,the PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs.

5. The 5mm width Addressable 144 leds RGB Pixel LED strip is made of flexible PCB material on 5mm width, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

6. If the strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. There are 5050 12mm width 144 pixels, 3535 7.2mm wdith 144 pixels digital led tapes to choose.

8. Vivid lighting performance operated by Arduino, Raspberry Pi, Madrix,Artnet/DMX/MADRIX NEBULA.

Related Products.

DMX512 RGBW RGBTW Pixel LED strips DMX address writer

DMX512 RGBW RGBTW Pixel LED strips DMX address writer

Leave review
Color
Single ColorRGBRGBW
Protocol
DMX512

1. This DMX address writer mainly for the DMX512 IC chip pixel LED strips we produce

2. It support standard DMX512 protocol A, B ; signle DMX512 protocol A

3. After DMX address mark ready, program inside can test the address mark if was correct

4. This multi-functional DMX512 address writer no need to connect the addressable cable like PI or PO in led strips

5. Support multi DMX512 IC chips like UCS512, GS8512 ,Hi512,and other DMX512 IC chips

6. Support standard RDM protocol

7. With the color picking function of the color palette, you can select a color value in the palette for control, and support multiple four-color modes

1. This is our new DMX512 address code writer mainly for the DMX512 IC chip pixel LED strips we produce like standard DMX512 A,B or single DMX512 protocol A strips.

2. Different DMX512 IC chip lighting different colors when DMX512 address write ready. Like the DMX512 RGBW led strips play white color.

3. This is new DMX address writer that support multi DMX512 IC chips like UCS512, GS8512 ,Hi512,and other DMX512 IC chips.

4. Compared to the button version DMX address writer, this DMX address writer is touch version. 

5. Finished to write DMX address, we can choose the demo program inside to test the DMX address if was correct . 

6. Support RDM protocol. It support search for RDM lamps, statically detect, write DXM512 address through UID, etc.

7. With the color picking function of the color palette, you can select a color value in the palette for control, and support multiple four-color modes that old verison couldn't. 

Read More
SP901E Pixel LED Digital TTL SPI Signal Amplifier

SP901E Pixel LED Digital TTL SPI Signal Amplifier

Leave review
Color
RGBRGBW
Protocol
SPIDMX512

1. SPI / DMX512 TTL SPI signal Amplifier

2. Support almost every kind of one-wire or two-wires LED driver IC

3. Support setting pixel number and segment numbers based on the Main controller

4. DC5V~24V wide range working voltage, reverse power supply input protection

5.This Signal Amplifier control model is depends on the main controller

6.It can work with K-1000C, SP108E, SP107E, CSY08, CSY07, Raspberry pi, Arduino X2 music controller,etc

1. This SPI / DMX512 signal amplifier is compatible with all kinds of 5V-TTL signal dual signals. It receives one signal and simultaneously output 4 or 8 channels of signals. Each channel can control the same quantity of LED pixels as main controller.

2. It can output 8 channels for addressable LED strip with single data wire, such as WS2812B, WS2811, SK6812RGB, SK6812-RGBW,UCS2904, etc. It can output 4 channels for addressable LED strip with data & clock wires WS2801, APA102, SK9822 or dual data wires, such as GS8208, WS2815.

3. DC5V~24V wide range of working voltage, but it cannot regulate the output voltage. That means the output voltage of power supply must be the same as the work voltage of your LED lights. The current through the amplifier is limited, when the current consumed is high, you need to add the power supply of the corresponding voltage.

4. Multiple signal amplifiers can be cascaded together synchronously. Particularly suitable for small and medium dream color lighting projects. It can work with K-1000C, SP108E, SP107E, CSY08, CSY07, Raspberry pi, Arduino X2 music controller,etc.

5. This Signal Amplifier control the IC chip version like SK6812 or DMX512  , pixels qty, RGB color sequence, program modles are all based on the Main controller. 

6. The controller cannot regulate the output voltage at the VCC. That means the output voltage of your power supply must be the same as the work voltage of your LED lights. If your lights need 5V input, please use a 5V power supply, don't use higher than 5V power supply

7. The current through the amplifier is limited, when the consumption current is higher, you need to add power supply of the corresponding voltage additionally.

 

Read More
Pixel LED Multi-function Digital Slave Controller

Pixel LED Multi-function Digital Slave Controller

Leave review

1. Multi-function Digital LED slave Controller

2. With 4 output ports, each port load 512 pixels,2048 pixels maximum

3. Support DMX512 protocol + SPI /TTL protocl IC chips

4. Connect main-controllers to work together

5. On-line is work with Madrix software

6. Off-line controller, program saved in SD card, 15 files maximum

7. Widely used in all DMX512 led products projects

8. There are 8 ports LED slave controller to choose

1. Multi-function Digital Controller. Two control model: Control online mainly means DMX512; Control offline mainly means normal SPI/TTL IC chips.

2. IP address settings on the main controller;

3. Controller with 2G SD card, program saved in SD card for offline playback;

4. Using Fast Ethernet, TCP / IP communication protocol, host connectivity LED controller via standard network cable;

5. Each slave controller has four output ports, a single port output control 512 pixels;

Color
RGBRGBW
Protocol
SPIDMX512
Read More
YM-501 Pixel LED Multi-function Digital Controller

YM-501 Pixel LED Multi-function Digital Controller

Leave review

1. Multi-function Digital Controller

2. With 4 output ports, each port load 512 pixels,2048 pixels maximum

3. Support DMX512 protocol + SPI /TTL protocl IC chips

4. Connect sub-controllers when product is DMX512 chips that on-line

5. On-line is work with Madrix software

6. Click buttons or remoter to control program models, speed

7. Off-line controller, program saved in SD card, 15 files maximum

8. Widely used in all DMX512 led products projects

1. Multi-function Digital Controller. Two control model: Control online mainly means DMX512; Control offline mainly means normal SPI/TTL IC chips.

2. IP address settings: with LCD display, no DIP switch design, all IP and MAC is set to be completed by the key;

3. Controller with 2G SD card, program saved in SD card for offline playback;

4. Using Fast Ethernet, TCP / IP communication protocol, host connectivity LED controller via standard network cable;

5. Each controller has four output ports, a single port output control 512 pixels;

6. This multip function LED cotroller have master controller function too, that on-line can be cascaded to 16 sub-controllers, 31 units can be cascaded off of control maximum;

7 Grayscale settings: Customers can never light gray under the circumstances to 65,536 (64K) adjust the gray, LED lights let you achieve the best display effect;

8. Brightness adjustment: 100 automatic brightness adjustment function allows you to adjust the display brightness is more effective;

9. EMC design, with good anti-jamming capability;

Color
RGBRGBW
Protocol
SPIDMX512
Read More