5V Addressable SK6812 144Leds RGB pixel led tape

1. Addressable SK6812 RGB 144 Pixel LED Digital Strip

2. DC5V, 30W/M

3. 12mm width White /Black FPCB

4. 2pin / 3pin JST-SM connector

5. 3M adhesive tape on backside of non-waterproof tape

6. Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

7.Compatiable with ws2811,WS2812b RGB pixel led strip tape

Color

RGB

Pixel

1 led/pixel

Protocol

SPI

Voltage

5V

More Details.

1. These addressable ws2812b sk6812 144 leds RGB pixel tape are incredibly cool that each led is powered by a sk6812/ws2812b led that enables them to be individually addressable.

2. We choose SK6812/WS2812b RGB LED which it is an intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050 components.

3. This 144 pixel led tapes are ultra-high density which are ready for you to blink.

4. The LEDs are controlled by shift-registers that are chained up and down the tape so you can shorten or lengthen the tape.

5. SK6812 RGB LED is single digital out pin ,the PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs.

6. The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

7. If the strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

8. There not only have 30 pixels to 60 pixels digital led tapes to choose, but also have 12V addressable RGB 30 pixels to 144 pixels led tapes.

9. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Related Products.

Enquiry Now.

Name *
Company
E-mail *
Phone
Detail