High Brightness 12V Addressable RGB 60Leds Pixel LED tape

1. High Brightness 12V addressable RGB 60 Pixel LED Strip

2. DC12V, 14.4W/M

3. 10mm width White /Black FPCB

4. Double signal wire, break-point resume function

5. 3M adhesive tape on backside of non-waterproof tape

6. Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

7.Compatiable with SK6813,WS2815 RGB pixel led strip tape

Color

RGB

Pixel

Addressable

Protocol

SPI

Voltage

12V

More Details.

1. This strip is external GS8208 12V addressable RGB 60 Pixel LED Digital Strip that different with addressable 5V RGB led pixel strips like sk6812/ws2812b or ws2813. Actually the protocol is compatible with WS2811 RGB ones.

2.You can think this 12V individually address GS8208 RGB 60 LED strip is the updated version of sk6812, ws2812b.

3. There are integrated GS8208 version individually addressable 12V 30 - 144 pxiels to choose too. 

4. Compared to the brightness, this external 12V addressable RGB led strip have higher brightness than the integrated 12V addressable RGB led strip.  

5. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

6. Why 2 data signal? it is for led strip one led is broken , another data still can work ,unless 2 next led Two successive LED is broken then the led strip can not working . This GS8208 addressable 12V can make the led strip one is broken will not affect another led working.

7. There are two version for this GS8208 version IC. Normally we choose the GS8208B that without demo inside. 

8. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc

Related Products.

DMX512 RGB RGBW LED strips address mark writer

DMX512 RGB RGBW LED strips address mark writer

Leave review

1. This DMX address writer mainly for the DMX512 IC chip we produce

2. It support standard DMX512 protocol A, B ; signle DMX512 protocol A

3. After DMX address mark ready, program inside can test the address mark if correct

4. UCS512 A,B chip need to connect the PI cable to the DMX address coder

5. UCS512 C3/C4 chip no need to connect the PI cable to the DMX address coder

1. This is a DMX address code writer mainly for the DMX512 IC chip we produce like standard DMX512 A,B or single DMX512 protocol A strips.

2. Different DMX512 IC chip lighting different colors after DMX address write ready.

3. UCS512 A,B chip led strips lighting blue color when finish to write DMX address.

4. UCS512 C3/C4 chip led strip lighting white color when the DMX address write finished.

5. We have a video to show you how to write the DMX address based on different DMX512 IC chip you choose.

Color
RGBRGBW
Protocol
DMX512
Read More
SP107E Bluetooth LED Music Pixel Controller

SP107E Bluetooth LED Music Pixel Controller

Leave review
Color
RGBRGBW
Protocol
SPIDMX512

1. Long distance APP remote control via Blutooth

2. Support almost every kind of one-wire or two-wires LED driver IC

3. Support setting pixel number and segment number, support up to 960 pixels

4. With 18 kinds of LED strip music effects, 30 kinds of LED matrix music effects and 180 kinds of non-music effects

5. DC5V~24V wide range working voltage, reverse power supply input protection

6. User setting saving

1. Download and install the APP:
Both IOS version and Android OS version are available. (hardware should support Bluetooth)
•Requires IOS version 10.0 or later;
•Requires Android OS version 4.4 or later;
•Search “LED Chord” in App Store or Google Play or scan this QR code to download and install the APP;

2. Instructions:
APP Operatings:
1.Make sure you have turn on Bluetooth on your phone;
2.Open the APP, drag to refresh the device list, select device name “SP107E” to connect the controller, once connected you will able to rename your
controller;
3.Select RGB order and IC type;
4.Adjust pixel number;
5.Press ENTER.
Audio Input:
There are two ways to input the audio signal on SP107E, AUX IN and Build-IN microphone;
•AUX IN: Plug the supplied audio split cable into the “AUX IN” jack, connect the audio output source(MP3,Phone or tablet…)and the speaker(or
headset), controller will automatically switch into AUX input mode;
•MIC: Disconnect the audio cable, controller will automatically switch into microphone input mode.

Read More
DMX512/1990 convert PWM decoder

DMX512/1990 convert PWM decoder

Leave review

1. Supply voltage: 12V-24VDC

2. Output: 3 channels / 4 channels

3. Support RGB / RGBW LED

4. Static power consumption:

5. Output current: each channel 4A

6.Output power: 12V:

7. 3pin XLR Socket,RJ45 interface

1. DMX common controller adopts the advanced micro control unit, it receives standard DMX-512 digital control signal and transformed it into PWM signal for driving LED;

2. You could connect DMX module with DMX digital console to achieve dimming or various changes in procedures.

3. Each DMX common controller occupied 3 / 4 DMX addresses, adopt coding switch set address, it is a Binary numerical code switch which is setting DMX original address code from 1 to 9, 1 is the lowest, and 9 is the highest, 511 address codes could be setted in all.

4. DMX original address code equal aggregate value of the coding switch value from 1 to 9, dial the coding switch upwards (ON is setted 1), the value of bit can be gotten, on the contrary, the value of bit is 0.

5. DMX signal can be received when coding switch FUN(10)-OFF(ON is setted 0).

Color
Single ColorRGBRGBW
Protocol
PWMDMX512
Read More
YM-501 Pixel LED Multi-function Digital Controller

YM-501 Pixel LED Multi-function Digital Controller

Leave review

1. Multi-function Digital Controller

2. With 4 output ports, each port load 512 pixels,2048 pixels maximum

3. Support DMX512 protocol + SPI /TTL protocl IC chips

4. Connect sub-controllers when product is DMX512 chips that on-line

5. On-line is work with Madrix software

6. Click buttons or remoter to control program models, speed

7. Off-line controller, program saved in SD card, 15 files maximum

8. Widely used in all DMX512 led products projects

1. Multi-function Digital Controller. Two control model: Control online mainly means DMX512; Control offline mainly means normal SPI/TTL IC chips.

2. IP address settings: with LCD display, no DIP switch design, all IP and MAC is set to be completed by the key;

3. Controller with 2G SD card, program saved in SD card for offline playback;

4. Using Fast Ethernet, TCP / IP communication protocol, host connectivity LED controller via standard network cable;

5. Each controller has four output ports, a single port output control 512 pixels;

6. This multip function LED cotroller have master controller function too, that on-line can be cascaded to 16 sub-controllers, 31 units can be cascaded off of control maximum;

7 Grayscale settings: Customers can never light gray under the circumstances to 65,536 (64K) adjust the gray, LED lights let you achieve the best display effect;

8. Brightness adjustment: 100 automatic brightness adjustment function allows you to adjust the display brightness is more effective;

9. EMC design, with good anti-jamming capability;

Color
RGBRGBW
Protocol
SPIDMX512
Read More