Integrated SK6812 3535 RGB Pixel LED

1. Top SMD internal integrated high quality external control line serial cascade constant current IC

2. control circuit and the RGB chip in SMD 3535 components, to form a complete control of pixel, color mixing uniformity and consistency

3. 8-bit color control (8-bit PWM per channel); 16.8 million colors per pixel

4. Power with 3.5-5.5VDC

5. white casing, black casing are available to choose

6. Used in entertainment, stage, live performance,etc

7. Support Arduino, Glediator, SD card controller, DMX,Artnet, MADRIX NEBULA,etc

Color

RGB

Pixel

Addressable

Protocal

SPI

Voltage

5V

More Details.

1. sk6812 mini 3535 Intelligent RGB LED is mini version based on most popular ws2812b(sk6812) leds.

2. Mini 3535 RGB LED is 3.5mm x 3.5mm are fairly easy to solder and are half the size of the standard 5x5mm ws2812b(sk6812) leds.

3. Driver chip is inside mini 3535 RGB LED and has a constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making your design minimal.

4. sk6812 mini 3535 RGB led uses a specialized single data line control interfact and requires strict timing-specific protocol which don’t like apa102c leds no timing-specific.

5. Mini LEDs basically have a ws2811, but fixed at the 800KHz setting that they’re the most compact way possible to integrate multiple bright LEDs to a design.

6. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator.

Related Products.

DMX512 RGB RGBW LED strips address mark writer

DMX512 RGB RGBW LED strips address mark writer

Leave review

1. This DMX address writer mainly for the DMX512 IC chip we produce

2. It support standard DMX512 protocol A, B ; signle DMX512 protocol A

3. After DMX address mark ready, program inside can test the address mark if correct

4. UCS512 A,B chip need to connect the PI cable to the DMX address coder

5. UCS512 C3/C4 chip no need to connect the PI cable to the DMX address coder

1. This is a DMX address code writer mainly for the DMX512 IC chip we produce like standard DMX512 A,B or single DMX512 protocol A strips.

2. Different DMX512 IC chip lighting different colors after DMX address write ready.

3. UCS512 A,B chip led strips lighting blue color when finish to write DMX address.

4. UCS512 C3/C4 chip led strip lighting white color when the DMX address write finished.

5. We have a video to show you how to write the DMX address based on different DMX512 IC chip you choose.

Color
RGBRGBW
Protocol
DMX512
Read More
SP107E Bluetooth LED Music Pixel Controller

SP107E Bluetooth LED Music Pixel Controller

Leave review
Color
RGBRGBW
Protocol
SPIDMX512

1. Long distance APP remote control via Blutooth

2. Support almost every kind of one-wire or two-wires LED driver IC

3. Support setting pixel number and segment number, support up to 960 pixels

4. With 18 kinds of LED strip music effects, 30 kinds of LED matrix music effects and 180 kinds of non-music effects

5. DC5V~24V wide range working voltage, reverse power supply input protection

6. User setting saving

1. Download and install the APP:
Both IOS version and Android OS version are available. (hardware should support Bluetooth)
•Requires IOS version 10.0 or later;
•Requires Android OS version 4.4 or later;
•Search “LED Chord” in App Store or Google Play or scan this QR code to download and install the APP;

2. Instructions:
APP Operatings:
1.Make sure you have turn on Bluetooth on your phone;
2.Open the APP, drag to refresh the device list, select device name “SP107E” to connect the controller, once connected you will able to rename your
controller;
3.Select RGB order and IC type;
4.Adjust pixel number;
5.Press ENTER.
Audio Input:
There are two ways to input the audio signal on SP107E, AUX IN and Build-IN microphone;
•AUX IN: Plug the supplied audio split cable into the “AUX IN” jack, connect the audio output source(MP3,Phone or tablet…)and the speaker(or
headset), controller will automatically switch into AUX input mode;
•MIC: Disconnect the audio cable, controller will automatically switch into microphone input mode.

Read More
DMX512/1990 convert PWM decoder

DMX512/1990 convert PWM decoder

Leave review

1. Supply voltage: 12V-24VDC

2. Output: 3 channels / 4 channels

3. Support RGB / RGBW LED

4. Static power consumption:

5. Output current: each channel 4A

6.Output power: 12V:

7. 3pin XLR Socket,RJ45 interface

1. DMX common controller adopts the advanced micro control unit, it receives standard DMX-512 digital control signal and transformed it into PWM signal for driving LED;

2. You could connect DMX module with DMX digital console to achieve dimming or various changes in procedures.

3. Each DMX common controller occupied 3 / 4 DMX addresses, adopt coding switch set address, it is a Binary numerical code switch which is setting DMX original address code from 1 to 9, 1 is the lowest, and 9 is the highest, 511 address codes could be setted in all.

4. DMX original address code equal aggregate value of the coding switch value from 1 to 9, dial the coding switch upwards (ON is setted 1), the value of bit can be gotten, on the contrary, the value of bit is 0.

5. DMX signal can be received when coding switch FUN(10)-OFF(ON is setted 0).

Color
Single ColorRGBRGBW
Protocol
PWMDMX512
Read More
8192 pixels K-8000C RGB RGBW Pixel led tapes controller

8192 pixels K-8000C RGB RGBW Pixel led tapes controller

Leave review

1. SD card offline controller

2. 8-port output 8192 pixels maximum

3. DC5V-24V working

4. Add a display based on old version

5. Add more IC chips + DMX512 chips

6. Comes with DMX512 chips write address code function

7. Support our all led digital strips, led pixel lights,etc

1、K-8000C is evolution of K-8000D + T-8000A two functions together.

2、Controller has eight ports output, each port can support up to 512/1024 lights(DMX lights can support up to 512 pixels).

3、Program saved in SD card, the SD card can store up to 32 files, SD cared capacity supports 128MB-32GB.

4、The controller can single set use,also multiple controllers cascade, cascade optical isolation mode: interference, better stability, cascade distance between two controllers can reach up to 150 meters, need to use 0.5 square meters pure copper power cord.

5、Controller support chip can lock the support IC in software, or not lock the support IC in the software, select the support IC through the controller CHIP button, this scheme is more flexible and convenient.

6、For the DMX lighting IC, the controller comes with write address function; In addition, with use of our 2020 LedEdit-K V3.26 or later edition can make one key write address function setting.

7、Support load lamp is 4 channels (RGBW) pixels, or split into single channel point pixels.

8、Enhanced 485 TTL and 485 differential (DMX) signal output.

9、The controller comes with the test effects were as follows: 1 red, green, blue and black jump; 2 red, green, blue and black gradient; 3 red, green, blue and goes.

Compatible with wide range of addressable LED chipsets:

TM1803/TM1804/TM1809/TM1812/TM1825/TM1826/TM1829/TA9909/TA9912/TM1913/TM1914

UCS1903/UCS1912/UCS2903/UCS2909/UCS2912/UCS3903/UCS3912/UCS8903/UCS8904

LPD6803/LPD1886/LPD1882/LPD1889

SM16716/SM16726/SM16711/SM16703

WS2811/WS2801/WS2803/WS2812B/WS2813/ws2815/ws2818

LX1003/LX2003/LX2006

INK1003/INK1009

P9813/P9816/D705/9883/P9823

SK6812/SK6812RGBW/SK6822/SK6812mini/SK9822

APA102/APA102C/APA104/APA2020

TLS3001/TLS3008/TLS3100

DMX 500K/DMX 250K-CZF

GS8208/GS8205/GS8206/GS8512

Color
RGBRGBW
Protocol
SPIDMX512
Read More