Integrated SK6812 4020 Side emitting RGB Pixel LED

Color

RGB

Pixel

Addressable

Protocal

SPI

Voltage

5V

More Details.

Related Products.

DMX512 RGBW RGBTW Pixel LED strips DMX address writer

DMX512 RGBW RGBTW Pixel LED strips DMX address writer

Leave review
Color
Single ColorRGBRGBW
Protocol
DMX512

1. This DMX address writer mainly for the DMX512 IC chip pixel LED strips we produce

2. It support standard DMX512 protocol A, B ; signle DMX512 protocol A

3. After DMX address mark ready, program inside can test the address mark if was correct

4. This multi-functional DMX512 address writer no need to connect the addressable cable like PI or PO in led strips

5. Support multi DMX512 IC chips like UCS512, GS8512 ,Hi512,and other DMX512 IC chips

6. Support standard RDM protocol

7. With the color picking function of the color palette, you can select a color value in the palette for control, and support multiple four-color modes

1. This is our new DMX512 address code writer mainly for the DMX512 IC chip pixel LED strips we produce like standard DMX512 A,B or single DMX512 protocol A strips.

2. Different DMX512 IC chip lighting different colors when DMX512 address write ready. Like the DMX512 RGBW led strips play white color.

3. This is new DMX address writer that support multi DMX512 IC chips like UCS512, GS8512 ,Hi512,and other DMX512 IC chips.

4. Compared to the button version DMX address writer, this DMX address writer is touch version. 

5. Finished to write DMX address, we can choose the demo program inside to test the DMX address if was correct . 

6. Support RDM protocol. It support search for RDM lamps, statically detect, write DXM512 address through UID, etc.

7. With the color picking function of the color palette, you can select a color value in the palette for control, and support multiple four-color modes that old verison couldn't. 

Read More
SP108E LED WIFI Pixel Controller

SP108E LED WIFI Pixel Controller

Leave review

1. Long distance APP remote control via WIFI;

2. Support routing mode(AP) and LAN connection mode(STA);

3. Support almost every kind of one-wire or two-wire LED driver IC ;

4. Brightness adjustable, With 180 kinds of patterns and 8 kind of color adjustable patterns;

5.Creatively using from-image-to-effect method for user to DIY any effect;

6. Support setting pixel number and segments number, able to control up to 2048 pixels;

5. DC5V~24V wide range working voltage, preventing reverse connection of power supply;

6. User setting saving;

1. App control:
Both IOS version and Android OS version are available. (hardware should support WIFI)
•Requires IOS version 10.0 or later;
•Requires Android OS version 4.4 or later;
•Search”LedShop”in App Store or Google pay or scan this QR code to download and install the App

3. Functions:
•Button:
1.Click on the button: Switch working mode;
2.Long press the button: Enter automatic distribution network mode;
•Indicator Light:
1.Blue: AP(Access Point) mode;
2.Green: STA(Station) mode;
•Working Mode:
1.AP(Access Point) mode:The mobile phone can be directly connected to the controller in this mode,while the controller is equivalent to a Access Point.
Connect steps:
1).In the WIFI setting page of your phone,find and connect the controller(named like SP108E_XX, the default password is 12345678);
2).Open the LED Shop App ,then the controller will be showed on the device list;
2.STA(Station) mode:
Connect steps: 1. Automatic distribution network,This method is recommended for the router's WIFI band of 2.4GHZ:
1).Open LED Shop APP and make sure that your phone is connected to a WIFI network,long press the button in the controller until the
green indicator starts flashing. Input the WIFI password, then press the OK to confirm and wait for the configure processing finish;
2).When controller successfully enter the WIFI network, it will be showed on the device list;
2. Manual distribution network,This mode is used for the router to enable multi-frequency integration, and is compatible with the router
WIFI band of 2.4GHghz:
1).Open the APP;Select the WIFI network and enter the WIFI password you want to connect to,then click the nextz button in your APP.
2).Set the controller as Access Point mode (AP),At the same time, please connect the wireless name corresponding to the controller AP
mode in the setting interface of your mobile phone. The wireless name format is SP108E_XXX and click next;
3).Starting network distribution now,network distribution time will be long,please patiently wait for the completion of operation;After
the success of the distribution network,the indicator light of the controller turns green.Please go to the main interface of the LED
Shop APP and refresh the device list.After the device appears in the device list of the APP, click and control it.
3.Remove device:
1).Click the switch button to return the controller to AP mode and also to STA mode;
2).In the STA mode of controller, select the corresponding controller after the APP is connected and click remove device to move
the controller out of the current network. At this time, the controller enters AP mode.

Color
RGBRGBW
Protocol
SPIDMX512
Read More
SP107E Bluetooth LED Music Pixel Controller

SP107E Bluetooth LED Music Pixel Controller

Leave review
Color
RGBRGBW
Protocol
SPIDMX512

1. Long distance APP remote control via Blutooth

2. Support almost every kind of one-wire or two-wires LED driver IC

3. Support setting pixel number and segment number, support up to 960 pixels

4. With 18 kinds of LED strip music effects, 30 kinds of LED matrix music effects and 180 kinds of non-music effects

5. DC5V~24V wide range working voltage, reverse power supply input protection

6. User setting saving

1. Download and install the APP:
Both IOS version and Android OS version are available. (hardware should support Bluetooth)
•Requires IOS version 10.0 or later;
•Requires Android OS version 4.4 or later;
•Search “LED Chord” in App Store or Google Play or scan this QR code to download and install the APP;

2. Instructions:
APP Operatings:
1.Make sure you have turn on Bluetooth on your phone;
2.Open the APP, drag to refresh the device list, select device name “SP107E” to connect the controller, once connected you will able to rename your
controller;
3.Select RGB order and IC type;
4.Adjust pixel number;
5.Press ENTER.
Audio Input:
There are two ways to input the audio signal on SP107E, AUX IN and Build-IN microphone;
•AUX IN: Plug the supplied audio split cable into the “AUX IN” jack, connect the audio output source(MP3,Phone or tablet…)and the speaker(or
headset), controller will automatically switch into AUX input mode;
•MIC: Disconnect the audio cable, controller will automatically switch into microphone input mode.

Read More
DMX512 RGB RGBW LED strips address mark writer

DMX512 RGB RGBW LED strips address mark writer

Leave review

1. This DMX address writer mainly for the DMX512 IC chip we produce

2. It support standard DMX512 protocol A, B ; signle DMX512 protocol A

3. After DMX address mark ready, program inside can test the address mark if correct

4. UCS512 A,B chip need to connect the PI cable to the DMX address coder

5. UCS512 C3/C4 chip no need to connect the PI cable to the DMX address coder

1. This is a DMX address code writer mainly for the DMX512 IC chip we produce like standard DMX512 A,B or single DMX512 protocol A strips.

2. Different DMX512 IC chip lighting different colors after DMX address write ready.

3. UCS512 A,B chip led strips lighting blue color when finish to write DMX address.

4. UCS512 C3/C4 chip led strip lighting white color when the DMX address write finished.

5. We have a video to show you how to write the DMX address based on different DMX512 IC chip you choose.

Color
RGBRGBW
Protocol
DMX512
Read More