Integrated SK6812 RGBW RGBNW Pixel LED

1. Top SMD internal integrated high quality external control line serial cascade constant current IC

2. control circuit and the RGB chip in SMD 5050 components, to form a complete control of pixel, color mixing uniformity and consistency

3. 8-bit color control (8-bit PWM per channel); 16.8 million colors per pixel

4. 3000K / 4500K / 6500K White CCT to choose

5. White casing, Black casing are available to choose

6. Used in entertainment, stage, live performance,etc

7. Support Arduino, Glediator, SD card controller, DMX,Artnet,MADRIX NEBULA, etc

Color

RGBW

Pixel

Addressable

Protocal

SPI

Voltage

5V

More Details.

1. SK6812RGBW RGBWW Intelligent LED is 4 channels R,G,B,W inside in smd5050 LED for excellent lighting effects.

2. SK6812RGBW LED, one half is the RGB, the other half is a white LED with a yellow starburst.

3. It controlled with 8-bit PWM per channel (8 x 4 channels = 32-bit color overall). Great for adding lots of colorful + warm white ( neutral white or cool white ) to your project.

4. Each LED acts like a shift register, reading incoming data on the input pins, and then shifting the previous data out on the output pin.

5. The PWM is built into each LED-chip so once you set the brightness you can stop talking to the strip and it will continue to PWM all the LEDs

6. This RGBW LED use a specialized single data line control interfact and requires strict timing-specific protocol.

7. LEDs use 800 KHz protocol that faster than sk6812 leds 400 HZ.

Related Products.

2048 pixels K-1000C RGB RGBW pixel led tapes controller

2048 pixels K-1000C RGB RGBW pixel led tapes controller

Leave review

1. SD card offline controller

2. 1-port output 2048 pixels max

3. DC5V-24V working

4. Add a display based on old version

5. Add more IC chips + DMX512 chips

6. Comes with DMX512 chips write address code function

7. 2020 Lededit software

8. Support our all led digital strips, led pixel lights,etc

1. This K-1000c sd card led controller 2048 pixels is evolution of our classic T-1000s + K-1000D two controllers funtion together.

2. The controller has single port output that can support up to 512/2048 pixels lights(DMX lights can support up to 512 pixels).

3. Improve functions that support load lamp is 4 channels (RGBW) pixels, enhanced 485 TTL and 485 differential (DMX) signal output.

4. Controller support chip can lock the support IC in software, or not lock the support IC in the software, select the support IC through the controller CHIP button, more flexible and convenient.

5. Comes with a 256MB SD card included. This version support 2GB sd card that old ones couldn’t.

6. For the DMX lighting IC, the controller comes with write address function; In addition, with use of 2016 LedEdit-K V3.26 or later edition can make one key write address function setting.

7. The controller can single set use,also multiple controllers cascade, cascade optical isolation mode: interference, better stability, cascade distance between two controllers can reach up to 150 meters, need to use 0.5 square meters pure copper power cord.

8. Controller comes with the test effects were as follows: 1 red, green, blue and black jump; 2 red, green, blue and black gradient; 3 red, green, blue and goes.

9.Note: To copy files to SD card, you must first format to the SD card. SD card must be formatted as “FAT” format.

Compatible with wide range of addressable LED chipsets:

TM1803/TM1804/TM1809/TM1812/TM1825/TM1826/TM1829/TA9909/TA9912/TM1913/TM1914

UCS1903/UCS1912/UCS2903/UCS2909/UCS2912/UCS3903/UCS3912/UCS8903/UCS8904

LPD6803/LPD1886/LPD8812/LPD1889

SM16716/SM16726/SM16711/SM16703

WS2811/WS2801/WS2803/WS2812B/WS2813/ws2815/ws2818

LX1003/LX2003/LX2006

INK1003/INK1009

P9813/P9816/D705/9883/P9823

SK6812/SK6812RGBW/SK6822/SK6812mini/SK9822

APA102/APA102C/APA104/APA2020

TLS3001/TLS3008/TLS3100

DMX 500K/DMX 250K-CZF

GS8208/GS8205/GS8206/GS8512

Color
RGBRGBW
Protocol
SPIDMX512
Read More
SP108E LED WIFI Pixel Controller

SP108E LED WIFI Pixel Controller

Leave review

1. Long distance APP remote control via WIFI;

2. Support routing mode(AP) and LAN connection mode(STA);

3. Support almost every kind of one-wire or two-wire LED driver IC ;

4. Brightness adjustable, With 180 kinds of patterns and 8 kind of color adjustable patterns;

5.Creatively using from-image-to-effect method for user to DIY any effect;

6. Support setting pixel number and segments number, able to control up to 2048 pixels;

5. DC5V~24V wide range working voltage, preventing reverse connection of power supply;

6. User setting saving;

1. App control:
Both IOS version and Android OS version are available. (hardware should support WIFI)
•Requires IOS version 10.0 or later;
•Requires Android OS version 4.4 or later;
•Search”LedShop”in App Store or Google pay or scan this QR code to download and install the App

3. Functions:
•Button:
1.Click on the button: Switch working mode;
2.Long press the button: Enter automatic distribution network mode;
•Indicator Light:
1.Blue: AP(Access Point) mode;
2.Green: STA(Station) mode;
•Working Mode:
1.AP(Access Point) mode:The mobile phone can be directly connected to the controller in this mode,while the controller is equivalent to a Access Point.
Connect steps:
1).In the WIFI setting page of your phone,find and connect the controller(named like SP108E_XX, the default password is 12345678);
2).Open the LED Shop App ,then the controller will be showed on the device list;
2.STA(Station) mode:
Connect steps: 1. Automatic distribution network,This method is recommended for the router's WIFI band of 2.4GHZ:
1).Open LED Shop APP and make sure that your phone is connected to a WIFI network,long press the button in the controller until the
green indicator starts flashing. Input the WIFI password, then press the OK to confirm and wait for the configure processing finish;
2).When controller successfully enter the WIFI network, it will be showed on the device list;
2. Manual distribution network,This mode is used for the router to enable multi-frequency integration, and is compatible with the router
WIFI band of 2.4GHghz:
1).Open the APP;Select the WIFI network and enter the WIFI password you want to connect to,then click the nextz button in your APP.
2).Set the controller as Access Point mode (AP),At the same time, please connect the wireless name corresponding to the controller AP
mode in the setting interface of your mobile phone. The wireless name format is SP108E_XXX and click next;
3).Starting network distribution now,network distribution time will be long,please patiently wait for the completion of operation;After
the success of the distribution network,the indicator light of the controller turns green.Please go to the main interface of the LED
Shop APP and refresh the device list.After the device appears in the device list of the APP, click and control it.
3.Remove device:
1).Click the switch button to return the controller to AP mode and also to STA mode;
2).In the STA mode of controller, select the corresponding controller after the APP is connected and click remove device to move
the controller out of the current network. At this time, the controller enters AP mode.

Color
RGBRGBW
Protocol
SPIDMX512
Read More
SP107E Bluetooth LED Music Pixel Controller

SP107E Bluetooth LED Music Pixel Controller

Leave review
Color
RGBRGBW
Protocol
SPIDMX512

1. Long distance APP remote control via Blutooth

2. Support almost every kind of one-wire or two-wires LED driver IC

3. Support setting pixel number and segment number, support up to 960 pixels

4. With 18 kinds of LED strip music effects, 30 kinds of LED matrix music effects and 180 kinds of non-music effects

5. DC5V~24V wide range working voltage, reverse power supply input protection

6. User setting saving

1. Download and install the APP:
Both IOS version and Android OS version are available. (hardware should support Bluetooth)
•Requires IOS version 10.0 or later;
•Requires Android OS version 4.4 or later;
•Search “LED Chord” in App Store or Google Play or scan this QR code to download and install the APP;

2. Instructions:
APP Operatings:
1.Make sure you have turn on Bluetooth on your phone;
2.Open the APP, drag to refresh the device list, select device name “SP107E” to connect the controller, once connected you will able to rename your
controller;
3.Select RGB order and IC type;
4.Adjust pixel number;
5.Press ENTER.
Audio Input:
There are two ways to input the audio signal on SP107E, AUX IN and Build-IN microphone;
•AUX IN: Plug the supplied audio split cable into the “AUX IN” jack, connect the audio output source(MP3,Phone or tablet…)and the speaker(or
headset), controller will automatically switch into AUX input mode;
•MIC: Disconnect the audio cable, controller will automatically switch into microphone input mode.

Read More
DMX512 RGBW RGBTW Pixel LED strips DMX address writer

DMX512 RGBW RGBTW Pixel LED strips DMX address writer

Leave review
Color
Single ColorRGBRGBW
Protocol
DMX512

1. This DMX address writer mainly for the DMX512 IC chip pixel LED strips we produce

2. It support standard DMX512 protocol A, B ; signle DMX512 protocol A

3. After DMX address mark ready, program inside can test the address mark if was correct

4. This multi-functional DMX512 address writer no need to connect the addressable cable like PI or PO in led strips

5. Support multi DMX512 IC chips like UCS512, GS8512 ,Hi512,and other DMX512 IC chips

6. Support standard RDM protocol

7. With the color picking function of the color palette, you can select a color value in the palette for control, and support multiple four-color modes

1. This is our new DMX512 address code writer mainly for the DMX512 IC chip pixel LED strips we produce like standard DMX512 A,B or single DMX512 protocol A strips.

2. Different DMX512 IC chip lighting different colors when DMX512 address write ready. Like the DMX512 RGBW led strips play white color.

3. This is new DMX address writer that support multi DMX512 IC chips like UCS512, GS8512 ,Hi512,and other DMX512 IC chips.

4. Compared to the button version DMX address writer, this DMX address writer is touch version. 

5. Finished to write DMX address, we can choose the demo program inside to test the DMX address if was correct . 

6. Support RDM protocol. It support search for RDM lamps, statically detect, write DXM512 address through UID, etc.

7. With the color picking function of the color palette, you can select a color value in the palette for control, and support multiple four-color modes that old verison couldn't. 

Read More