Integrated SK6812 WWA tunable whtie Pixel LED

1. Top SMD internal integrated high quality external control line serial cascade constant current IC

2. control circuit and the RGB chip in SMD 5050 components, to form a complete control of pixel, color mixing uniformity and consistency

3. 8-bit color control (8-bit PWM per channel); 16.8 million colors per pixel

4. Warm white, 3000K; Cold White, 6500K; Amber ,1800K White CCT to tunable

5. White casing, Black casing are available to choose

6. Used in entertainment, stage, live performance,etc

7. Support Arduino, Glediator, SD card controller, DMX,Artnet,MADRIX NEBULA, etc









More Details.

1. SK6812 WWA Intelligent LED is 3 channels Warm white,Cold white and Amber 3 colors inside in smd5050 LED for excellent tunable white lighting effects.

2. SK6812WWA LED, one half is the Warm White and Cold White, the other half is Amber color.

3. It controlled with 8-bit PWM per channel (8 x 3 channels = 24-bit color overall). Great for adding lots of tunable white colors to your project.

4. Each LED acts like a shift register, reading incoming data on the input pins, and then shifting the previous data out on the output pin.

5. The PWM is built into each LED-chip so once you set the brightness you can stop talking to the strip and it will continue to PWM all the LEDs

6. This SK6812 WWA LED use a specialized single data line control interfact and requires strict timing-specific protocol.

7. LEDs use 800 KHz protocol that faster than sk6812 leds 400 HZ.

Related Products.

2048 pixels T-1000S RGB pixel led tapes controller

2048 pixels T-1000S RGB pixel led tapes controller

Leave review

1. SD card offline controller

2. Single-port output 2048 pixels

3. DC5V-24V working

4. Support 256MB sd card

5. Lededit software

6. Control led pixel stripe tapes, led amusement lights

1. The programmable T1000s sd card led controller 2048 pixels makes controlling your LED displays easy. Compatible with wide range of addressable LEDs and DMX signal communication protocol.

2. Perfect addressable LED solution for people who don’t want to programme Arduino or other controllers. No programming code required.

3. Using the programmes LEDedit 2016 or Glediator lets you draw your LED patterns visually, you can specify how the LEDs are arranged, preview them, then upload to an SD card. The SD card plugs into the controller and displays your pattern. You can even upload video for your LEDs to display!

Comes with a 256MB SD card included.

Note: To copy files to SD card, you must first format to the SD card. SD card must be formatted as “FAT” format.

Compatible with wide range of addressable LED chipsets:












Read More
DMX512/1990 convert PWM decoder

DMX512/1990 convert PWM decoder

Leave review

1. Supply voltage: 12V-24VDC

2. Output: 3 channels / 4 channels

3. Support RGB / RGBW LED

4. Static power consumption:

5. Output current: each channel 4A

6.Output power: 12V:

7. 3pin XLR Socket,RJ45 interface

1. DMX common controller adopts the advanced micro control unit, it receives standard DMX-512 digital control signal and transformed it into PWM signal for driving LED;

2. You could connect DMX module with DMX digital console to achieve dimming or various changes in procedures.

3. Each DMX common controller occupied 3 / 4 DMX addresses, adopt coding switch set address, it is a Binary numerical code switch which is setting DMX original address code from 1 to 9, 1 is the lowest, and 9 is the highest, 511 address codes could be setted in all.

4. DMX original address code equal aggregate value of the coding switch value from 1 to 9, dial the coding switch upwards (ON is setted 1), the value of bit can be gotten, on the contrary, the value of bit is 0.

5. DMX signal can be received when coding switch FUN(10)-OFF(ON is setted 0).

Single ColorRGBRGBW
Read More
SP901E Pixel LED Digital TTL SPI Signal Amplifier

SP901E Pixel LED Digital TTL SPI Signal Amplifier

Leave review

1. SPI / DMX512 TTL SPI signal Amplifier

2. Support almost every kind of one-wire or two-wires LED driver IC

3. Support setting pixel number and segment numbers based on the Main controller

4. DC5V~24V wide range working voltage, reverse power supply input protection

5.This Signal Amplifier control model is depends on the main controller

6.It can work with K-1000C, SP108E, SP107E, CSY08, CSY07, Raspberry pi, Arduino X2 music controller,etc

1. This SPI / DMX512 signal amplifier is compatible with all kinds of 5V-TTL signal dual signals. It receives one signal and simultaneously output 4 or 8 channels of signals. Each channel can control the same quantity of LED pixels as main controller.

2. It can output 8 channels for addressable LED strip with single data wire, such as WS2812B, WS2811, SK6812RGB, SK6812-RGBW,UCS2904, etc. It can output 4 channels for addressable LED strip with data & clock wires WS2801, APA102, SK9822 or dual data wires, such as GS8208, WS2815.

3. DC5V~24V wide range of working voltage, but it cannot regulate the output voltage. That means the output voltage of power supply must be the same as the work voltage of your LED lights. The current through the amplifier is limited, when the current consumed is high, you need to add the power supply of the corresponding voltage.

4. Multiple signal amplifiers can be cascaded together synchronously. Particularly suitable for small and medium dream color lighting projects. It can work with K-1000C, SP108E, SP107E, CSY08, CSY07, Raspberry pi, Arduino X2 music controller,etc.

5. This Signal Amplifier control the IC chip version like SK6812 or DMX512  , pixels qty, RGB color sequence, program modles are all based on the Main controller. 

6. The controller cannot regulate the output voltage at the VCC. That means the output voltage of your power supply must be the same as the work voltage of your LED lights. If your lights need 5V input, please use a 5V power supply, don't use higher than 5V power supply

7. The current through the amplifier is limited, when the consumption current is higher, you need to add power supply of the corresponding voltage additionally.


Read More
Pixel LED Multi-function Digital Slave Controller

Pixel LED Multi-function Digital Slave Controller

Leave review

1. Multi-function Digital LED slave Controller

2. With 4 output ports, each port load 512 pixels,2048 pixels maximum

3. Support DMX512 protocol + SPI /TTL protocl IC chips

4. Connect main-controllers to work together

5. On-line is work with Madrix software

6. Off-line controller, program saved in SD card, 15 files maximum

7. Widely used in all DMX512 led products projects

8. There are 8 ports LED slave controller to choose

1. Multi-function Digital Controller. Two control model: Control online mainly means DMX512; Control offline mainly means normal SPI/TTL IC chips.

2. IP address settings on the main controller;

3. Controller with 2G SD card, program saved in SD card for offline playback;

4. Using Fast Ethernet, TCP / IP communication protocol, host connectivity LED controller via standard network cable;

5. Each slave controller has four output ports, a single port output control 512 pixels;

Read More