1.Intelligent reverse connect protection, the power supply reverse connection does not damage the IC.
2. Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.
3. Cascading port transmission signal by single data line.
4. 3000K / 4500K / 6500K White CCT
5. Send data at speeds of 800Kbps, scan frequency not less than 400Hz/s
6. Widely to make addressable neopixel white led strips, neopixel white matrixs that used in entertainment, stage, live performance,etc
7. Support Arduino, Glediator, SD card controller, DMX,Artnet, MADRIX NEBULA,etc
Color
Pixel
Protocal
Voltage
1. SK6812 white is a intelligent control LED light source that the control circuit and white chip are integrated in a package of 5050 components. Allows you to control the white color and brightness independently.
2. In contrast to the APA102c white LED which use a standard SPI interface for control (with separate data and clock signals) and has no specific timing requirements, the ws2812b white LED use a specialized one-wire ( data) control interface and require strict timing.
3. SK6812 white LED diffuse the 3 white chips inside together for a very bright but consistant light, compared to what you get by trying to mix RGB to make white (which never quite looks right).
4. Each sk6812 white LED acts like a shift register, reading incoming color data on the input pins, and then shifting the previous color data out on the output pin.
5. After transmission for each white pixel，the signal to reduce 24bit. pixel adopt auto resha -ping transmit technology, making the pixel cascade number is not limited the signal transmission, only depend on the speed of signal transmission.
6. WS2812b white LED with low driving voltage, environmental protection and energy saving, high brightness, scattering angl e is large, good consistency, low power, long life and other advantages.
7. The control chip integrated in LED above becoming more simple circuit, small volume, convenient installation.
