LED Accessory

LED accessory contains any others things you maybe use. LED connectors, led chips, IC chips, even cables. 

If you DO NOT find the product you are looking for, inquiry us freely.

Led Accessory

Quick Find By:

Filters
Color
Single Color
RGB
RGBW
Pixel
Addressable
3 led/pixel
6 led/pixel
Protocal
PWM
SPI
DMX512
Voltage
5V
12V
24V
Rating
Integrated SK6812 WWA tunable whtie Pixel LED

Integrated SK6812 WWA tunable whtie Pixel LED

Leave review
Color
RGB
Pixel
Addressable
Protocal
SPI
Voltage
5V

1. Top SMD internal integrated high quality external control line serial cascade constant current IC

2. control circuit and the RGB chip in SMD 5050 components, to form a complete control of pixel, color mixing uniformity and consistency

3. 8-bit color control (8-bit PWM per channel); 16.8 million colors per pixel

4. Warm white, 3000K; Cold White, 6500K; Amber ,1800K White CCT to tunable

5. White casing, Black casing are available to choose

6. Used in entertainment, stage, live performance,etc

7. Support Arduino, Glediator, SD card controller, DMX,Artnet,MADRIX NEBULA, etc

1. SK6812 WWA Intelligent LED is 3 channels Warm white,Cold white and Amber 3 colors inside in smd5050 LED for excellent tunable white lighting effects.

2. SK6812WWA LED, one half is the Warm White and Cold White, the other half is Amber color.

3. It controlled with 8-bit PWM per channel (8 x 3 channels = 24-bit color overall). Great for adding lots of tunable white colors to your project.

4. Each LED acts like a shift register, reading incoming data on the input pins, and then shifting the previous data out on the output pin.

5. The PWM is built into each LED-chip so once you set the brightness you can stop talking to the strip and it will continue to PWM all the LEDs

6. This SK6812 WWA LED use a specialized single data line control interfact and requires strict timing-specific protocol.

7. LEDs use 800 KHz protocol that faster than sk6812 leds 400 HZ.

Read More
Integrated SK6812 4020 Side emitting RGB Pixel LED

Integrated SK6812 4020 Side emitting RGB Pixel LED

Leave review
Color
RGB
Pixel
Addressable
Protocal
SPI
Voltage
5V
Read More
Integrated SK6812 3535 RGB Pixel LED

Integrated SK6812 3535 RGB Pixel LED

Leave review
Color
RGB
Pixel
Addressable
Protocal
SPI
Voltage
5V

1. Top SMD internal integrated high quality external control line serial cascade constant current IC

2. control circuit and the RGB chip in SMD 3535 components, to form a complete control of pixel, color mixing uniformity and consistency

3. 8-bit color control (8-bit PWM per channel); 16.8 million colors per pixel

4. Power with 3.5-5.5VDC

5. white casing, black casing are available to choose

6. Used in entertainment, stage, live performance,etc

7. Support Arduino, Glediator, SD card controller, DMX,Artnet, MADRIX NEBULA,etc

1. sk6812 mini 3535 Intelligent RGB LED is mini version based on most popular ws2812b(sk6812) leds.

2. Mini 3535 RGB LED is 3.5mm x 3.5mm are fairly easy to solder and are half the size of the standard 5x5mm ws2812b(sk6812) leds.

3. Driver chip is inside mini 3535 RGB LED and has a constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making your design minimal.

4. sk6812 mini 3535 RGB led uses a specialized single data line control interfact and requires strict timing-specific protocol which don’t like apa102c leds no timing-specific.

5. Mini LEDs basically have a ws2811, but fixed at the 800KHz setting that they’re the most compact way possible to integrate multiple bright LEDs to a design.

6. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator.

Read More
Integrated SK9822 APA102C White Pixel LED

Integrated SK9822 APA102C White Pixel LED

Leave review
Color
Single Color
Pixel
Addressable
Protocal
SPI
Voltage
5V

1. CMOS process,lowvoltage,low consumption

2. Synchronization of two-lane

3. Build 20 mA constant current output

4. With self-detection signal build in support for continuou soscillation PWM output

5. 3000K / 4500K / 6500K available

6. Widely to make addressable white dotstar led strips, addressable white dotstar matrixs that used in entertainment, stage, live performance,etc

7. Support Arduino, Glediator, SD card controller, DMX,Artnet, MADRIX NEBULA, etc

1. Smart APA102c SK9822 smd5050 LEDs in white color has an integrated driver APA102 that allows you to control the white color and brightness independently.

2. In contrast to the SK6812 white LEDs which use a specialized one-wire ( data) control interface and require strict timing, the APA102C white intelligent LED use a standard SPI interface for control (with separate data and clock signals) and has no specific timing requirements, making it much easier to control.

3. APA102c white LED diffuse the 3 white dies inside together for a very bright but consistant light, compared to what you get by trying to mix RGB to make white (which never quite looks right).

4. Each APA102c white LED acts like a shift register, reading incoming color data on the input pins, and then shifting the previous color data out on the output pin.

5. With much faster protocol than sk6812 LEDs 800 KHz protocol.

6. APA102c white LED has 20 KHz PWM rate that you won’t see pixelation than sk6812 white leds PWM rate happens 400 Hz, which works well but is noticably at lower brightnesses.

Read More
Integrated SK6812 Digital White Pixel LED

Integrated SK6812 Digital White Pixel LED

Leave review
Color
Single Color
Pixel
Addressable
Protocal
SPI
Voltage
5V

1.Intelligent reverse connect protection, the power supply reverse connection does not damage the IC.

2. Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.

3. Cascading port transmission signal by single data line.

4. 3000K / 4500K / 6500K White CCT

5. Send data at speeds of 800Kbps, scan frequency not less than 400Hz/s

6. Widely to make addressable neopixel white led strips, neopixel white matrixs that used in entertainment, stage, live performance,etc

7. Support Arduino, Glediator, SD card controller, DMX,Artnet, MADRIX NEBULA,etc

1. SK6812 white is a intelligent control LED light source that the control circuit and white chip are integrated in a package of 5050 components. Allows you to control the white color and brightness independently.

2. In contrast to the APA102c white LED which use a standard SPI interface for control (with separate data and clock signals) and has no specific timing requirements, the ws2812b white LED use a specialized one-wire ( data) control interface and require strict timing.

3. SK6812 white LED diffuse the 3 white chips inside together for a very bright but consistant light, compared to what you get by trying to mix RGB to make white (which never quite looks right).

4. Each sk6812 white LED acts like a shift register, reading incoming color data on the input pins, and then shifting the previous color data out on the output pin.

5. After transmission for each white pixel,the signal to reduce 24bit. pixel adopt auto resha -ping transmit technology, making the pixel cascade number is not limited the signal transmission, only depend on the speed of signal transmission.

6. WS2812b white LED with low driving voltage, environmental protection and energy saving, high brightness, scattering angl e is large, good consistency, low power, long life and other advantages.

7. The control chip integrated in LED above becoming more simple circuit, small volume, convenient installation.

Read More
Integrated SK6812 RGBW RGBNW Pixel LED

Integrated SK6812 RGBW RGBNW Pixel LED

Leave review
Color
RGBW
Pixel
Addressable
Protocal
SPI
Voltage
5V

1. Top SMD internal integrated high quality external control line serial cascade constant current IC

2. control circuit and the RGB chip in SMD 5050 components, to form a complete control of pixel, color mixing uniformity and consistency

3. 8-bit color control (8-bit PWM per channel); 16.8 million colors per pixel

4. 3000K / 4500K / 6500K White CCT to choose

5. White casing, Black casing are available to choose

6. Used in entertainment, stage, live performance,etc

7. Support Arduino, Glediator, SD card controller, DMX,Artnet,MADRIX NEBULA, etc

1. SK6812RGBW RGBWW Intelligent LED is 4 channels R,G,B,W inside in smd5050 LED for excellent lighting effects.

2. SK6812RGBW LED, one half is the RGB, the other half is a white LED with a yellow starburst.

3. It controlled with 8-bit PWM per channel (8 x 4 channels = 32-bit color overall). Great for adding lots of colorful + warm white ( neutral white or cool white ) to your project.

4. Each LED acts like a shift register, reading incoming data on the input pins, and then shifting the previous data out on the output pin.

5. The PWM is built into each LED-chip so once you set the brightness you can stop talking to the strip and it will continue to PWM all the LEDs

6. This RGBW LED use a specialized single data line control interfact and requires strict timing-specific protocol.

7. LEDs use 800 KHz protocol that faster than sk6812 leds 400 HZ.

Read More
Integrated SK6812 RGB Pixel LED

Integrated SK6812 RGB Pixel LED

Leave review
Color
RGB
Pixel
Addressable
Protocal
SPI
Voltage
5V

1.Intelligent reverse connect protection, the power supply reverse connection does not damage the IC.

2. Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel point.

3. Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.

4. 8-bit (256 level)color set, 16.8 millions colors, scan frequency not less than 400Hz/s.

5. Cascading port transmission signal by single data line.

6. Send data at speeds of 800Kbps.

7.The color of the light were highly consistent, cost-effective.

8. Widely to make neopixel led strips, neopixel matrixs that used in entertainment, stage, live performance,etc

9. Support Arduino, Glediator, SD card controller, DMX,Artnet, MADRIX NEBULA, etc

1. sk6812 is a intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050 components.

2. It internal include intelligent digital port data latch and signal reshaping ampli fication drive circuit. Also include a precision internal oscillator and a 12V voltage programmable constant curr e-nt control part, effectively ensuring the pixel point light color height consistent.

3. The data transfer protocol use single NZR communication mode. After the pixel power-on reset, the DIN port receive data from controller, the first pixel collect initial 24bit data then sent to the internal data latch, the other data which reshaping by the internal signal reshaping amplification circuit sent to the next cascade pixel through the DO port.

4. After transmission for each pixel,the signal to reduce 24bit. pixel adopt auto resha -ping transmit technology, making the pixel cascade number is not limited the signal transmission, only depend on the speed of signal transmission.

5. WS2812b sk6812 LED with low driving voltage, environmental protection and energy saving, high brightness, scattering angl e is large, good consistency, low power, long life and other advantages.

6. The control chip integrated in LED above becoming more simple circuit, small volume, convenient installation.

Read More
Integrated APA102C RGB Pixel LED

Integrated APA102C RGB Pixel LED

Leave review
Color
RGB
Pixel
Addressable
Protocal
SPI
Voltage
5V

1. CMOS process,low voltage,low consumption

2. Synchronization of two-lane

3. Choose positive output or negative RGB three-color LED output

4. 8-bit (256 level)color set, 5-bit (32 level) brightness adjustment

5. Build 20 mA constant current output

6. With self-detection signal build in support for continuou soscillation PWM output

7. Widely to make dotstar led strips, dotstar matrixs that used in entertainment, stage, live performance,etc

8. Support Arduino, Glediator, SD card controller, DMX,Artnet, MADRIX NEBULA, etc

1. APA102c RGB Intelligent LED is new design based on most popular ws2812b RGB leds.

2. In contrast to the SK6812 and WS2812B LEDs which use a specialized one-wire ( data) control interface and require strict timing, the APA102C RGB LED use a standard SPI interface for control (with separate data and clock signals) and has no specific timing requirements, making it much easier to control.

3. APA102C RGB LED has an additional 5-bit brightness control register that allows the brightness of each pixel to be adjusted independently of its color.

4. Each APA102c RGB LED acts like a shift register, reading incoming color data on the input pins, and then shifting the previous color data out on the output pin.

5. With much faster protocl than WS2812b RGB LEDs 800 KHz protocol.

6. APA102c RGB LED has 20 KHz PWM rate that you won’t see pixelation than ws2812b leds PWM rate happens 400 Hz, which works well but is noticably at lower brightnesses.

7. APA102C has a clone product named SK9822, this SK9822 has extremly similar with APA102C.

Read More