LED Pixel Tape

We not only have conventional led strip products we offer,but also have customized FPCB led tapes.

There are single color,RGB,RGBW and RGBWW led tapes which cover PWM,SPI, DMX512 LED strips to choose based on your projects.

Also, you can find the hot-seller addressable White,RGB,RGBW LED tapes from DC5V to DC12V at this page. 

If you CAN NOT find the product you are looking for, inquiry us freely. 

Led Pixel Tape

Quick find by:

Filters
Color
Single Color
RGB
RGBW
Pixel
Addressable
3 led/pixel
6 led/pixel
Protocol
PWM
SPI
DMX512
Voltage
5V
12V
24V
Rating
Addressable Digital RGB COB LED Pixel Strip

Addressable Digital RGB COB LED Pixel Strip

Leave review
Color
RGB
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. Addressable Digital RGB COB LED Pixel Strip

2. DC5V , 332 LEDs/m

3. 12W/m, CRI>80

4. 10mm width FPCB

5. WS2811/WS2812b/SK6812 RGB protocol compitable

6. 3M adhensive tape on backside of non-waterproof strip

7. Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

1. Amazing, this is Addressable Digital RGB COB LED Pixel Strip. Not the single color COB led strip. 

2. The COB led strips biggest advantage is no glare, beautiful appearance,soft luminous surface, without spot that compared to the classical addressable rgb pixel led strips like ws2812b,sk6812 led strips

3. The LEDs are controlled by shift-registers that are chained up and down the tape so you can shorten or lengthen the tape.

4. SK6812 RGB LED chip is soldering on the PCB directly, on the top, glue the silicone.

5. The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters on the back side of PCB, there are cut-lines .Solder to the 0.1" copper pads and you're good to go.

6. If the strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. For the addressable digital RGB COB led pixel tape, we only have 332 leds/m currently

8. Vivid lighting performance operated by Arduino, Raspberry Pi, Madrix,Artnet/DMX/MADRIX NEBULA.

9. The COB LED strips, consider the high density leds, we do not recommend to choose the IP67 or IP68. 

Read More
COB Single color LED Strip

COB Single color LED Strip

Leave review
Color
Single Color
Pixel
6 led/pixel
Protocol
PWM
Voltage
24V

1. COB Single color LED Strip

2. DC5V / DC12V / DC24V , 528 LEDs/m

3. 11W/m, CRI>80 or CRI>90

4. 8mm width FPCB

5. White/RED/BLUE/GREEN/YELLOW/UV LEDs are available

6. 3M adhensive tape on backside of non-waterproof strip

7. Support PWM LED controller can achieve uniform color temperature and brightness adjustment

1. This is COB Single color LED Strip 528 LEDs tape. Not digital led strip, only analog single color. 

2. The matched control system can achieve uniform color temperature and brightness adjustment. 

3. The COB led strips biggest advantage is no glare, beautiful appearance,soft luminous surface, without spot that compared to the classical single color led strips like 5050,2835 ,even 2110 led strips

4. For the White LEDs, there are 2200K to 10,000K white CCT to choose. 

5. CRI>80,CRI>90 are available to offer.

6. There are 320 leds, 384 leds COB LED strips to choose.

7. Amazing is we also have addressable rgb pixel COB led strip.

8. Integrated package solution for more uniform and consistent light mixing

9. Wide range of illumination for more compact lighting space.

10. For white color, high color consistency, within 5 steps SDCM(3 steps Optional).

11. The COB LED strips, consider the high density leds, we do not recommend to choose the IP67 or IP68. 

12. If there was defctive leds, you just cut the segment based on the pads, then solder it.

Read More
5V Addressable 60Leds 5-in-1 RGBTW RGBWW pixel led tape

5V Addressable 60Leds 5-in-1 RGBTW RGBWW pixel led tape

Leave review
Color
RGBW
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. Addressable 5-in-1 RGBTW RGBWW Pixel LED Digital Strip

2. DC5V, 24W/M

3. 12mm width White / Black FPCB

4. Warm white 2700K,Cool white 6500K to choose

5. 60pcs 5-in-1 RGBWW RGBTW LEDs plus 60 pcs TM1936 IC chip

6. 3M adhensive tape on backside of non-waterproof strip

7. Support K-1000C/ K-8000C/ YM-501 /DMX512,Artnet /MADRIX NEBULA to control

8. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc

1. This high addressable 5 colors RGBWW 60 pixel tapes are incredibly cool that each led is powered by a TM1936 IC chip that enables them to be individually addressable.

2. Compared to the integrated SK6812 RGBW ones, this external IC chip TM1936 5-in-1 RGBW LED strip has much higher brightness and much colors available which colors range from warm white 2700K to 6500K.

3. Entire strip has 60 pixels ( 300channels), 60 pcs RGBWW leds in a meter with 12mm width pcb board.

4. There are Warm white 2700K, Cold white 6500K white CCT to choose.Of course, if you need other colors, we are offer to customized.

5. The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

6. If the strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Read More
5V Addressable 30Leds 5-in-1 RGBTW RGBWW pixel led tape

5V Addressable 30Leds 5-in-1 RGBTW RGBWW pixel led tape

Leave review
Color
RGBW
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. Addressable 5-in-1 RGBTW RGBWW Pixel LED Digital Strip

2. DC5V, 12W/M

3. 12mm width White / Black FPCB

4. Warm white 2700K,Cool white 6500K to choose

5. 30pcs 5-in-1 RGBWW RGBTW LEDs plus 30 pcs LPD8806 IC chip

6. 3M adhensive tape on backside of non-waterproof strip

7. Support K-1000C/ K-8000C/ YM-501 /DMX512,Artnet /MADRIX NEBULA to control

8. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc

1. This high addressable 5 colors RGBWW 30 pixel tapes are incredibly cool that each led is powered by a LPD8806 IC chip that enables them to be individually addressable.

2. Compared to the integrated SK6812 RGBW ones, this external IC chip LPD8806 5-in-1 RGBW LED strip has much higher brightness and much colors available which colors range from warm white 2700K to 6500K.

3. Entire strip has 30 pixels ( 150channels), 30 pcs RGBWW leds in a meter with 12mm width pcb board.

4. There are Warm white 2700K, Cold white 6500K white CCT to choose.Of course, if you need other colors, we are offer to customized.

5. The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

6. If the strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Read More
24V 120 Leds DMX512 RGBW Pixel LED Digital Tape

24V 120 Leds DMX512 RGBW Pixel LED Digital Tape

Leave review
Color
RGBW
Pixel
6 led/pixel
Protocol
DMX512
Voltage
24V

1. DMX512 RGBW RGBWW Pixel 120 LEDs Digital Tape

2. DC24V, 39W/M

3. 15mm width White / Black FPCB

4. Warm white 3000K, neutral white 4500K, Cool white 6500K to choose

5. 3M adhensive tape on backside of non-waterproof strip

6. Support K-1000C/ K-8000C/ YM-501 /DMX512,Artnet to control

7.Standard DMX512 Signal wire digital control interface A,B

8. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc

1. This tape is DMX 512 RGBW 120 leds digital strips that different with normal SPI led pixel strips.

DMX512 led strips protocl is DMX512 that signal is parallel not series.

2. Its advantage is parallel DMX512 signal could avoid RGBW LEDs color influenced by the failure of one light in serial connection.

3. Entire strip has 20 pixels ( 80 channels), 120 pcs RGBW leds in a meter with 15mm width pcb board.

4. Communication between DMX512 led digital strips are synchronized perfectly under support of Artnet / DMX512 led controllers.

5. DMX512 RGBW led pixel tape strips DMX address need to be set via DMX address coder / controller.

6. Vivid lighting performance operated by Madrix software, Artnet / DMX512 led controllers.

7. 20 pixels 120 leds DMX512 RGBW led strip is flexible , bright, durable and easy for installation.

For bare board strip, you can use the 3M adhensive tape on back; For waterproof silicone tube strip, there shipped with flexible silicon brackets and screws, the brackets fit over the waterproof sheath, it would be used to mount the led strips very well.

8. Also, there are not only 24V 10 pixels 60 leds DMX512 RGBW led strip to choose,but also have 12V 60 leds and 72 leds DMX512 RGBW led strips to offer.

9. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc.

Read More
12V 60 Leds DMX512 RGBW Pixel LED Digital Tape

12V 60 Leds DMX512 RGBW Pixel LED Digital Tape

Leave review
Color
RGBW
Pixel
3 led/pixel
Protocol
DMX512
Voltage
12V

1. DMX512 RGBW RGBWW Pixel 60 LED Digital Tape

2. DC12V, 20W/M

3. 12mm width FPCB

4. Warm white 3000K, neutral white 4500K, Cool white 6500K to choose

5. 3M adhensive tape on backside of non-waterproof strip

6. Support K-1000C/ K-8000C/ YM-501 /DMX512 control,Artnet to control

7.Standard DMX512 Signal wire digital control interface A,B

8. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc

1. This tape is DMX 512 RGBW led digital strips that different with normal SPI led pixel strips. DMX512 led strips protocl is DMX512 that signal is parallel not series.

2. Its advantage is parallel DMX512 signal could avoid RGBW LEDs color influenced by the failure of one light in serial connection.

3. Entire strip has 20 pixels ( 80 channels), 60 pcs RGBW leds in a meter with 12mm width pcb board.

4. Communication between DMX512 led digital strips are synchronized perfectly under support of Artnet / DMX512 led controllers.

5. DMX512 RGBW led pixel tape strips DMX address need to be set via DMX address coder / controller.

6. Vivid lighting performance operated by Madrix software, Artnet / DMX512 led controllers.

7. This 12V 20 pixels 60 leds DMX512 RGBW led strip is flexible , bright, durable and easy for installation.

For bare board strip, you can use the 3M adhensive tape on back; For waterproof silicone tube strip, there shipped with flexible silicon brackets and screws, the brackets fit over the waterproof sheath, it would be used to mount the led strips very well.

8. Also, there are not only 12V 24 pixels 72 leds DMX512 RGBW led strip to choose,but also have 24V 60 leds and 120 leds DMX512 RGBW led strips to offer.

9. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc

Read More
Addressable DMX512 RGBW 32 Pixels LED Digital Strip

Addressable DMX512 RGBW 32 Pixels LED Digital Strip

Leave review
Color
RGBW
Pixel
Addressable
Protocol
DMX512
Voltage
5V

1. Addressable DMX512 RGBW RGBWW Pixel LED Digital Strip

2. DC5V, 10W/M

3. 12mm width White / Black FPCB

4. Warm white 3000K, neutral white 4500K, Cool white 6500K to choose

5. 3M adhensive tape on backside of non-waterproof strip

6. Support K-1000C/ K-8000C/ YM-501 /DMX512,Artnet to control

7.Standard DMX512 Signal wire digital control interface A,B

8. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc

1. This strip is Addressable DMX 512 RGBW led digital strips that different with normal SPI led pixel strips.

DMX512 led strips protocl is DMX512 that signal is parallel not series.

2. Its advantage is parallel DMX512 signal could avoid RGBW LEDs color influenced by the failure of one light in serial connection.

3. Entire strip has 32 pixels ( 128 channels), 32 pcs RGBW leds in a meter with 12mm width pcb board.

4. Communication between DMX512 led digital strips are synchronized perfectly under support of Artnet / DMX512 led controllers.

5. DMX512 RGBW led pixel tape strips DMX address need to be set via DMX address coder / controller.

6. Vivid lighting performance operated by Madrix software, Artnet / DMX512 led controllers.

7. Addressable DMX512 RGBW led strip is flexible , bright, durable and easy for installation.

For bare board strip, you can use the 3M adhensive tape on back; For waterproof silicone tube strip, there shipped with flexible silicon brackets and screws, the brackets fit over the waterproof sheath, it would be used to mount the led strips very well.

8. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc.

Read More
12V 60 Leds DMX512 RGB Addressable Pixel LED Digital Strip

12V 60 Leds DMX512 RGB Addressable Pixel LED Digital Strip

Leave review
Color
RGB
Pixel
Addressable
Protocol
DMX512
Voltage
12V

1. Addressable 12V DMX512 RGB 60 Pixels LED Digital Strip

2. DC12V, 10W/M

3. 12mm width White / Black FPCB

4. 3M adhensive tape on backside of non-waterproof strip

5. Support K-1000C/ K-8000C/ YM-501 /DMX512/MADRIX NEBULA,Artnet to control

6.Single DMX512 Signal wire digital control interface A

7. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc

1. This strip is Addressable 12V DMX 512 RGB 60 pixels LED digital strips that different with normal SPI led pixel strips.

DMX512 led strips protocl is DMX512 that signal is parallel not series.

2. Its advantage is parallel DMX512 signal could avoid RGB LEDs color influenced by the failure of one light in serial connection.

3. Entire strip has 60 pixels ( 180 channels), 60 pcs RGB leds in a meter with 12mm width pcb board.

4. From the product you can see there are no external DMX512 IC chip, it is the unique integrated DMX512 IC chip inside the 5050 LED, we called 8512. Due to it has 3 channels, named 8512 RGB LED.  

5. Communication between DMX512 led digital strips are synchronized perfectly under support of Artnet / DMX512 led controllers.

6. DMX512 RGB led pixel tape strips DMX address need to be set via DMX address coder / controller.

7. Vivid lighting performance operated by Madrix software, Artnet / DMX512 led controllers.

8. This 12V addressable DMX512 60 led tape is single Signal wire digital control interface A.

9. Addressable 12V DMX512 RGB 60 pixels led strip is flexible , bright, durable and easy for installation.

For bare board strip, you can use the 3M adhensive tape on back; For waterproof silicone tube strip, there shipped with flexible silicon brackets and screws, the brackets fit over the waterproof sheath, it would be used to mount the led strips very well.

10. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc.

Read More
12V 60 Leds DMX512 RGBW Addressable Pixel LED Digital Strip

12V 60 Leds DMX512 RGBW Addressable Pixel LED Digital Strip

Leave review
Color
RGBW
Pixel
Addressable
Protocol
DMX512
Voltage
12V

1. Addressable 12V DMX512 RGBW 60 Pixels LED Digital Strip

2. DC12V, 16W/M

3. 12mm width White / Black FPCB

4. 3M adhensive tape on backside of non-waterproof strip

5. Support K-1000C/ K-8000C/ YM-501 /DMX512/MADRIX NEBULA,Artnet to control

6.Single DMX512 Signal wire digital control interface A

7. 2700K-10,000K white CCT, CRI 80-95, 20-34lm to choose

8. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc

1. This strip is Addressable 12V DMX 512 RGBW 60 pixels LED digital strips that different with normal SPI led pixel strips.

DMX512 led strips protocl is DMX512 that signal is parallel not series.

2. Its advantage is parallel DMX512 signal could avoid RGB LEDs color influenced by the failure of one light in serial connection.

3. Entire strip has 60 pixels ( 240 channels), 60 pcs RGB leds plus 60 pcs 2835 White leds in a meter with 12mm width pcb board.

4. From the product you can see there are no external DMX512 IC chip, it is the unique integrated DMX512 IC chip inside the 5050 LED, we called 8512. Due to it has 4 channels, named 8512 RGBW LED.  

5. Communication between DMX512 led digital strips are synchronized perfectly under support of Artnet / DMX512 led controllers.

6. 12V addresable DMX512 RGBW led pixel tape strips DMX address need to be set via DMX address coder / controller.

7. Vivid lighting performance operated by Madrix software, Artnet / DMX512 led controllers.

8. This 12V addressable DMX512 RGBW 60 pixels led tape is single Signal wire digital control interface A.

9. There are 2700K-10,000K white CCT, CRI 80-95, 20-34lm/led to choose.You can tell us freely the White specs you need.

10. Addressable 12V DMX512 RGBW 60 pixels led strip is flexible , bright, durable and easy for installation.

For bare board strip, you can use the 3M adhensive tape on back; For waterproof silicone tube strip, there shipped with flexible silicon brackets and screws, the brackets fit over the waterproof sheath, it would be used to mount the led strips very well.

11. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc.

Read More