LED Pixel Tape

We not only have conventional led strip products we offer,but also have customized FPCB led tapes.

There are single color,RGB,RGBW and RGBWW led tapes which cover PWM,SPI, DMX512 LED strips to choose based on your projects.

Also, you can find the hot-seller addressable White,RGB,RGBW LED tapes from DC5V to DC24V at this page. 

If you CAN NOT find the product you are looking for, inquiry us freely. 

Led Pixel Tape

Quick find by:

Filters
Color
Single Color
RGB
RGBW
Pixel
Addressable
3 led/pixel
6 led/pixel
Protocol
PWM
SPI
DMX512
Voltage
5V
12V
24V
Rating
12V Addressable White 60Leds pixel led tape

12V Addressable White 60Leds pixel led tape

Leave review
Color
Single Color
Pixel
Addressable
Protocol
SPI
Voltage
12V

1. Individually 12V addressable White led strip

2. DC12V, 14W/m

3. 10mm wide White / Black PCB

4. 2pin / 3pin JST-SM connector

5. 2700K -10000K White CCT are available to choose

6. Not only white, but also Red,Green,Blue,Yellow,Purple,UV,etc other single colors to choose

7. 3M adhensive tape on backside of non-waterproof strip

8. Uniform luminescence better than the integrated SK9822 white led strips

9. Support SD controller,Arduino,Glediator,DMX512,Artnet, MADRIX NEBULA

1.We’ve all seen the cool RGB LED strips where each LED can be addressed with DC5V working voltage.

But for many projects, clients are prefer to choose the DC12V LED strips could be programmable white. Has any anyone seen good, super white LEDs in the 12V addressable led strips? Now, we developed and produced this new strip, 12v addressable programmable white led strip 60 leds/m.

2. This addressable 12v white led stripallows you to individually control all 60 super White LEDs on a bare board even waterproof, self-adhesive strip.

3. This strip isn’t the normal 3 leds per group led strip we see from the picture! why we say this? Because this addressable white led strip is made of special copper board that each channel of ws2811 IC to run each white LED. ( One IC have 3 channels, 1 channel control 1 LED )

4. Each 5m addressable controllable white strip comes with 0.1″ spaed 2 / 3-pin JST-SM connecotrs( +12v, DAT, GND) and 2-pin power cables.

5. The 12v addressable white led strip led strip change white colors via Arduino, DMX controller, sd card controllers like T1000s, T-300K, even the Raspberry Pi,MADRIX NEBULA.

6. Not only addressable white led strip, but also have addressable Red/ Green/ Yellow/ Blue , etc

7. For the brightness, the 12V addressable white led strip is much higher thant the SK9822 white led strips

8. This 12V addressable white led strip has another advantage compared to the SK9822 / SK6812 white led strips. There is a little dark point ( IC chip) in integrated SK9822 White / SK6812 White, so, integrated white LED like SK9822 white,SK6812 white color emitting is not uniform luminescence.

Read More
12V Addressable 30Leds RGBW pixel led tape

12V Addressable 30Leds RGBW pixel led tape

Leave review
Color
RGBW
Pixel
Addressable
Protocol
SPI
Voltage
12V
Read More
12V Addressable 60Leds RGBW pixel led tape

12V Addressable 60Leds RGBW pixel led tape

Leave review
Color
RGBW
Pixel
Addressable
Protocol
SPI
Voltage
12V

1. 12V Addressable RGBW RGBWW 60 LED Pixel Tape

2. DC12V , 34W/max

3. 12mm wide White /Black FPCB

4. 3000K,4500K,6000K White CCT are available to choose

5. 3M adhensive tape on backside of non-waterproof strip

6. Protocol compatiable with 5V SK6812 RGBW led pixel strips

7. Support SD controller,Arduino,Glediator,DMX512,Artnet, MADRIX NEBULA

1. Now we develop 12V addressable cuttable RGBW led strips that still use SK6812RGBW LED have 4 LEDs in them (Red, Green, Blue and White) for excellent lighting effects.That equals to you could use same 5v RGBW led strips programs to play. These LED strips are fun and glowy, and you can control each LED individually.

2. This is 12V Addressable RGBW RGBWW 60 LED Pixel Tape with a clear casing and white / black flex pcb, we also have RGBW strips of 30 led/m.

3. What we used is 8 feet sk6812 RGBW LED that different with 4 feet SK6812 RGBW LED. RGBW LED is ” split”, one half is the RGB you know and love, the other half is a white LED with a yellow phosphor. Unlit, it resembles an egg yolk. Lit up these are insanely bright and can be controlled with 8-bit PWM per channel.Great for adding lots of colorful + warm white ( neutral white or cool white ) to your project.

4. SK6812RGBW LEDS USE 800 KHz protocol so specific timing is required. On ws2812b leds, the PWM RATE IS 400 Hz,which works well but is noticeable if the LED is moving.

5. Considering on this 60 pixels 12V addressable RGBW led strip electric current is very big, we DO NOT recommend you to lighting this strip 4 chips lighting together at same time.

6. Pleasae note,12V Addressable RGBW RGBWW 60 LED Pixel Tape isn’t the Analog 12V /24V RGBW led strips

Read More
High Brightness Addressable RGBW 60 Leds pixel strip

High Brightness Addressable RGBW 60 Leds pixel strip

Leave review
Color
RGBW
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. High Brightness Addressable RGBW 60 Pixel LED Digital Strip

2. DC5V, 20W/M

3. 12mm width White /Black FPCB

4. 60 pcs RGBW LED plus 60 pcs UCS2904 IC chip

5. 2pin / 3pin JST-SM connector

6. 3M adhesive tape on backside of non-waterproof tape

7. Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

1. This high brightness UCS2904 addressable RGBW 60 pixel tapes are incredibly cool that each led is powered by a UCS2904 IC chip that enables them to be individually addressable.

2. Compared to the integrated SK6812 RGBW ones, this external IC chip UCS2904 RGBW LED strip has much higher brightness and much stability than the SK6812 RGBW series .

3. The UCS2904 RGBW led strip conventional color sequence is R-G-B-W, we can set any color sequence like B-G-R-W.

4. There are Warm white 2700K, Neutral White 4500K, Cold white 6500K white CCT to choose.

5. The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

6. If the strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. When you compared this addressable UCS2904 RGBW led strip and the SK6812 RGBW ones, recommend do not choose same program, even they have nearly 90% same protocol.

8. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Read More
24V UCS2904 RGBW 60 Leds pixel strip

24V UCS2904 RGBW 60 Leds pixel strip

Leave review
Color
RGBW
Pixel
6 led/pixel
Protocol
SPI
Voltage
24V

1. 24V UCS2904 RGBW 60 Leds pixel strip

2. DC24V, 20W/M

3. 10mm width White /Black FPCB

4. 6 leds per segment on 10mm width PCB board

5. 60 pcs RGBW LED plus 10 pcs UCS2904 IC chip

6. 2pin / 3pin JST-SM connector

7. 3M adhesive tape on backside of non-waterproof tape

8. Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

1. This strip is 24V UCS2904 4 channel RGBW 60 led digital strips that different with DMX512 RGBW led pixel strips. Actually the protocol is compatible with SK6812 RGBW led tape.

2. Compared to the integrated SK6812 RGBW ones, this external IC chip 24V UCS2904 RGBW 10 pixel 60 LED strip has much higher brightness and much stability.

3. Its advantage is this UCS2904 RGBW digital led strip can play pure white color compared to that classicial WS2811 RGB led strip couldn’t.

4. There are Warm white 2700K, Neutral White 4500K, Cold white 6500K white CCT to choose.

5. Entire strip has 10 pixels ( 40 channels), 60 pcs RGBW leds in a meter with 10mm width pcb board.

6. The 24V UCS2904 RGBW 60 led strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every 3 LED. Solder to the 0.1" copper pads and you're good to go.

7. If the strip does get damaged, it is often one pixel copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

8. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Read More
12V UCS2904 RGBW 60 Leds pixel strip

12V UCS2904 RGBW 60 Leds pixel strip

Leave review
Color
RGBW
Pixel
3 led/pixel
Protocol
SPI
Voltage
12V

1. 12V UCS2904 RGBW 60 Leds pixel strip

2. DC12V, 20W/M

3. 10mm width White /Black FPCB

4. 3 leds per segment on 10mm width PCB board

5. 60 pcs RGBW LED plus 20 pcs UCS2904 IC chip

6. 2pin / 3pin JST-SM connector

7. 3M adhesive tape on backside of non-waterproof tape

8. Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

1. This strip is 12V UCS2904 4 channel RGBW 60 led digital strips that different with DMX512 RGBW led pixel strips. Actually the protocol is compatible with SK6812 RGBW led tape.

2. Compared to the integrated SK6812 RGBW ones, this external IC chip 12V UCS2904 RGBW 60 LED strip has much higher brightness and much stability.

3. Its advantage is this UCS2904 RGBW digital led strip can play pure white color compared to that classicial WS2811 RGB led strip couldn’t.

4. There are Warm white 2700K, Neutral White 4500K, Cold white 6500K white CCT to choose.

5. Entire strip has 20 pixels ( 80 channels), 60 pcs RGBW leds in a meter with 10mm width pcb board.

6. The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every 3 LED. Solder to the 0.1" copper pads and you're good to go.

7. If the 12V UCS2904 RGBW pixel led strip does get damaged, it is often one pixel copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

8. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Read More
APA102C SK9822 60 LEDs Pixel Tape

APA102C SK9822 60 LEDs Pixel Tape

Leave review
Color
RGB
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. Addressable APA102C SK9822 60 Pixel LED Digital Strip

2. DC5V, 14W/M

3. 10mm width White /Black FPCB

4. 3pin / 4pin JST-SM connector

5. 3M adhesive tape on backside of non-waterproof tape

6. Double signal wire with DATA ,CLOCK

7.Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

1. These Addressable APA102C SK9822 60 Pixel LED Digital Strips are incredibly cool that each led is powered by a SK9822 led that enables them to be individually addressable.

2. SK9822 LEDs are 5050-sized LEDs with an embedded microcontroller inside which has double signal wire that we can push data much faster than with the SK6812 RGB ones protocol.

3. SK9822 LEDs have higher PWM refresh rates compared to the sk6812 RGB LEDs, and no specific timing requirements, making it much easier to control.

4. These SK9822 RGB LED is two separate data and clock signals out pin ,LEDs acts like a shift register, reading incoming color data on the input pins, and then shifting the previous color data out on the output pin.

5. The addressable SK9822 RGB 60 LED strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

6. If the SK9822 60 led strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. There not only have 30 pixels to 144 pixels RGB digital led tapes to choose, but also have sk9822 30-144 pixels addressable white led tapes to choose .

8. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Read More
APA102C SK9822 144 LEDs Pixel Tape

APA102C SK9822 144 LEDs Pixel Tape

Leave review
Color
RGB
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. Addressable APA102C SK9822 144 Pixel LED Digital Strip

2. DC5V, 34W/M

3. 10mm / 12mm width White /Black FPCB

4. 3pin / 4pin JST-SM connector

5. 3M adhesive tape on backside of non-waterproof tape

6. Double signal wire with DATA ,CLOCK

7.Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

1. These Addressable APA102C SK9822 144 Pixel LED Digital Strips are incredibly cool that each led is powered by a SK9822 led that enables them to be individually addressable.

2. SK9822 LEDs are 5050-sized LEDs with an embedded microcontroller inside which has double signal wire that we can push data much faster than with the SK6812 RGB ones protocol.

3. SK9822 LEDs have higher PWM refresh rates compared to the sk6812 RGB LEDs, and no specific timing requirements, making it much easier to control.

4. These SK9822 RGB LED is two separate data and clock signals out pin ,LEDs acts like a shift register, reading incoming color data on the input pins, and then shifting the previous color data out on the output pin.

5. The addressable SK9822 RGB 144 LED strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

6. If the SK9822 144 led strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. There not only have 30 pixels to 144 pixels RGB digital led tapes to choose, but also have sk9822 30-144 pixels addressable white led tapes to choose .

8. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Read More
APA102C SK9822 30 LEDs Pixel Tape

APA102C SK9822 30 LEDs Pixel Tape

Leave review
Color
RGB
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. Addressable APA102C SK9822 30 Pixel LED Digital Strip

2. DC5V, 7W/M

3. 10mm width White /Black FPCB

4. 3pin / 4pin JST-SM connector

5. 3M adhesive tape on backside of non-waterproof tape

6. Double signal wire with DATA ,CLOCK

7.Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

1. These Addressable APA102C SK9822 30 Pixel LED Digital Strips are incredibly cool that each led is powered by a SK9822 led that enables them to be individually addressable.

2. SK9822 LEDs are 5050-sized LEDs with an embedded microcontroller inside which has double signal wire that we can push data much faster than with the SK6812 RGB ones protocol.

3. SK9822 LEDs have higher PWM refresh rates compared to the sk6812 RGB LEDs, and no specific timing requirements, making it much easier to control.

4. These SK9822 RGB LED is two separate data and clock signals out pin ,LEDs acts like a shift register, reading incoming color data on the input pins, and then shifting the previous color data out on the output pin.

5. The addressable SK9822 RGB 30 LED strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

6. If the SK9822 30 led strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. There not only have 60 pixels to 144 pixels RGB digital led tapes to choose, but also have sk9822 30-144 pixels addressable white led tapes to choose .

8. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Read More