LED Pixel Tape

We not only have conventional led strip products we offer,but also have customized FPCB led tapes.

There are single color,RGB,RGBW and RGBWW led tapes which cover PWM,SPI, DMX512 LED strips to choose based on your projects.

Also, you can find the hot-seller addressable White,RGB,RGBW LED tapes from DC5V to DC24V at this page. 

If you CAN NOT find the product you are looking for, inquiry us freely. 

Led Pixel Tape

Quick find by:

Filters
Color
Single Color
RGB
RGBW
Pixel
Addressable
3 led/pixel
6 led/pixel
Protocol
PWM
SPI
DMX512
Voltage
5V
12V
24V
Rating
2835 single color 120 LEDs  tape

2835 single color 120 LEDs tape

Leave review
Color
Single Color
Pixel
3 led/pixel
Protocol
PWM
Voltage
12V

1. 2835 single color 120 LEDs tape

2. DC12V / DC24V, 120 LEDs/m

3. 19.2W/m, CRI>80 or CRI>90

4. 10mm width FPCB

5. White/RED/BLUE/GREEN/YELLOW/UV LEDs are available

6. 3M adhensive tape on backside of non-waterproof strip

7. Support PWM LED controller can achieve uniform color temperature and brightness adjustment

1. This is 2835 single color 120 LEDs  tape. Not digital led strip, only analog single color. 

2. The matched control system can achieve uniform color temperature and brightness adjustment. 

3. Compared to the 5050 LED, this 2835 led strips have much economic and brightness. 

4. For the White LEDs, there are 2200K to 10,000K white CCT to choose. 

5. CRI>80 ,CRI>90,CRI>95 are available to offer.

6. Range lumen from 20-22lm to 28-30lm/LEDs are available to choose

7. Integrated package solution for more uniform and consistent light mixing

8. It has high Efficiency, Up to 100lm/w.

9. High color consistency, within 5 steps SDCM(3 steps Optional).

10. IP20,IP65,IP67,IP68 are available

Read More
Analog 24V 4-in-1 RGBW 60 led tape

Analog 24V 4-in-1 RGBW 60 led tape

Leave review
Color
RGBW
Pixel
6 led/pixel
Protocol
PWM
Voltage
24V

Analog 24V 4-In-1 RGBW RGBWW 60 Leds Strip

1. Light source: SMD5050 Epistar LEDs 4-in-1 RGBW LED

2. DC24V , 20W maximum

3. 12mm width PCB (10mm width is available)

4. Warm White 2700K, 3000K, Neutral White 4500K, cold white 6500K to choose

4. IP20 / IP65 silicone tube

5. 3M adhensive tape on back side of non-waterproof RGBW led strip

6. Support RGBW controller, RGBW PWM DMX decoder

1. Analog 24V RGBW / RGBWW 60 leds strip

2. These RGBW led strip is 60 RGB and White LEDs per meter, you can control the entire strip color changing.

3. There are 12V and 24V RGBW led strips. White color temperature is warm white: 2800-3200k, cool white:6000-6500K.

4. We can cut this stuff pretty easily with wire cutters, there are cut-lines every 10cm (6 LEDs each) of 24V RGBW led strip; 12V RGBW led strip cut-lines is every 5cm (3 LEDs each).

5. RGBW LED contains white color chip inside 5050 RGB together for a very pure、bright but consistant light, compared to what you get by trying to mix RGB to make white ( which never quite looks right).

6. Normally use standard RGBW controller or RGBW DMX decoder to control.

7. RGBW led strips have 15cm 5pin cables soldered on the two ends of RGBW led strips.

8. Note: For this 12V/24V RGBW led strips, don’t be confused with our 5v sk6812rgbw led strips.

9. There are 10mm width Analog RGBW led tape to choose.

Read More
Analog 12V 4-in-1 RGBW 60 led tape

Analog 12V 4-in-1 RGBW 60 led tape

Leave review
Color
RGBW
Pixel
3 led/pixel
Protocol
PWM
Voltage
12V

Analog 4-In-1 RGBW RGBWW 60 Leds Strip

1. Light source: SMD5050 Epistar LEDs 4-in-1 RGBW LED

2. DC12V , 20W maximum

3. 12mm width PCB (10mm width is available)

4. Warm White 2700K, 3000K, Neutral White 4500K, cold white 6500K to choose

4. IP20 / IP65 silicone tube

5. 3M adhensive tape on back side of non-waterproof RGBW led strip

6. Support RGBW controller, RGBW PWM DMX decoder

1. Analog 12V RGBW / RGBWW 60 leds strip

2. These RGBW led strip is 60 RGB and White LEDs per meter, you can control the entire strip color changing.

3. There are 12V and 24V RGBW led strips. White color temperature is warm white: 2800-3200k, cool white:6000-6500K.

4. We can cut this stuff pretty easily with wire cutters, there are cut-lines every 5cm (3 LEDs each) of 12V RGBW led strip; 24V RGBW led strip cut-lines is every 10cm (6 LEDs each).

5. RGBW LED contains white color chip inside 5050 RGB together for a very pure、bright but consistant light, compared to what you get by trying to mix RGB to make white ( which never quite looks right).

6. Normally use standard RGBW controller or RGBW DMX decoder to control.

7. RGBW led strips have 15cm 5pin cables soldered on the two ends of RGBW led strips.

8. Note: For this 12V/24V RGBW led strips, don’t be confused with our 5v sk6812rgbw led strips.

9. There are 10mm width Analog RGBW led tape to choose.

Read More
12V Addressable UV 60Leds pixel led tape

12V Addressable UV 60Leds pixel led tape

Leave review
Color
Single Color
Pixel
Addressable
Protocol
SPI
Voltage
12V

1. 12v Addressable UV Led Strip Tape 60led/M Ws2811IC

2. DC12V , 14W/m

3. 10mm width White / Black FPCB

4. 265-405nm opition to choose

5. 3M adhensive tape on backside of non-waterproof strip

6. Support K-1000C/ K-8000C/ YM-501 /DMX512,Artnet/MADRIX NEBULA

7. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc

1.We’ve all seen the cool RGB,single color LED strips where each LED can be addressed with DC5V working voltage.

But for some special projects that need the addressable UV led tape. Depend this, we develop and produce this new 12v addressable programmable UV led strip 60 leds/m.

2. This 12v addressable white led strip allows you to individually control all 60 UV LEDs on a bare board even waterproof, self-adhesive strip.

3. This strip isn’t the normal 3 leds per group led strip we see from the picture! why we say this? Because this addressable white led strip is made of special copper board that each channel of ws2811 IC to run each white LED. ( One IC have 3 channels, 1 channel control 1 LED )

4. Each 5m addressable controllable white strip comes with 0.1″ spaed 2 / 3-pin JST-SM connecotrs( +12v, DAT, GND) and 2-pin power cables.

5. The 12v addressable UVled strip led strip change white colors via Arduino, DMX controller, sd card controllers like T1000s, T-300K, even the Raspberry Pi,MADRIX NEBULA.

6. Normally is 395-405nm, the shorter wave length,the brightness dimmer,the stronger the antivirus ability

7. The UVC led strip is available to make.

Read More
12V Addressable White 60Leds pixel led tape

12V Addressable White 60Leds pixel led tape

Leave review
Color
Single Color
Pixel
Addressable
Protocol
SPI
Voltage
12V

1. Individually 12V addressable White led strip

2. DC12V, 14W/m

3. 10mm wide White / Black PCB

4. 2pin / 3pin JST-SM connector

5. 2700K -10000K White CCT are available to choose

6. Not only white, but also Red,Green,Blue,Yellow,Purple,UV,etc other single colors to choose

7. 3M adhensive tape on backside of non-waterproof strip

8. Uniform luminescence better than the integrated SK9822 white led strips

9. Support SD controller,Arduino,Glediator,DMX512,Artnet, MADRIX NEBULA

1.We’ve all seen the cool RGB LED strips where each LED can be addressed with DC5V working voltage.

But for many projects, clients are prefer to choose the DC12V LED strips could be programmable white. Has any anyone seen good, super white LEDs in the 12V addressable led strips? Now, we developed and produced this new strip, 12v addressable programmable white led strip 60 leds/m.

2. This addressable 12v white led stripallows you to individually control all 60 super White LEDs on a bare board even waterproof, self-adhesive strip.

3. This strip isn’t the normal 3 leds per group led strip we see from the picture! why we say this? Because this addressable white led strip is made of special copper board that each channel of ws2811 IC to run each white LED. ( One IC have 3 channels, 1 channel control 1 LED )

4. Each 5m addressable controllable white strip comes with 0.1″ spaed 2 / 3-pin JST-SM connecotrs( +12v, DAT, GND) and 2-pin power cables.

5. The 12v addressable white led strip led strip change white colors via Arduino, DMX controller, sd card controllers like T1000s, T-300K, even the Raspberry Pi,MADRIX NEBULA.

6. Not only addressable white led strip, but also have addressable Red/ Green/ Yellow/ Blue , etc

7. For the brightness, the 12V addressable white led strip is much higher thant the SK9822 white led strips

8. This 12V addressable white led strip has another advantage compared to the SK9822 / SK6812 white led strips. There is a little dark point ( IC chip) in integrated SK9822 White / SK6812 White, so, integrated white LED like SK9822 white,SK6812 white color emitting is not uniform luminescence.

Read More
12V Addressable 30Leds RGBW pixel led tape

12V Addressable 30Leds RGBW pixel led tape

Leave review
Color
RGBW
Pixel
Addressable
Protocol
SPI
Voltage
12V
Read More
12V Addressable 60Leds RGBW pixel led tape

12V Addressable 60Leds RGBW pixel led tape

Leave review
Color
RGBW
Pixel
Addressable
Protocol
SPI
Voltage
12V

1. 12V Addressable RGBW RGBWW 60 LED Pixel Tape

2. DC12V , 34W/max

3. 12mm wide White /Black FPCB

4. 3000K,4500K,6000K White CCT are available to choose

5. 3M adhensive tape on backside of non-waterproof strip

6. Protocol compatiable with 5V SK6812 RGBW led pixel strips

7. Support SD controller,Arduino,Glediator,DMX512,Artnet, MADRIX NEBULA

1. Now we develop 12V addressable cuttable RGBW led strips that still use SK6812RGBW LED have 4 LEDs in them (Red, Green, Blue and White) for excellent lighting effects.That equals to you could use same 5v RGBW led strips programs to play. These LED strips are fun and glowy, and you can control each LED individually.

2. This is 12V Addressable RGBW RGBWW 60 LED Pixel Tape with a clear casing and white / black flex pcb, we also have RGBW strips of 30 led/m.

3. What we used is 8 feet sk6812 RGBW LED that different with 4 feet SK6812 RGBW LED. RGBW LED is ” split”, one half is the RGB you know and love, the other half is a white LED with a yellow phosphor. Unlit, it resembles an egg yolk. Lit up these are insanely bright and can be controlled with 8-bit PWM per channel.Great for adding lots of colorful + warm white ( neutral white or cool white ) to your project.

4. SK6812RGBW LEDS USE 800 KHz protocol so specific timing is required. On ws2812b leds, the PWM RATE IS 400 Hz,which works well but is noticeable if the LED is moving.

5. Considering on this 60 pixels 12V addressable RGBW led strip electric current is very big, we DO NOT recommend you to lighting this strip 4 chips lighting together at same time.

6. Pleasae note,12V Addressable RGBW RGBWW 60 LED Pixel Tape isn’t the Analog 12V /24V RGBW led strips

Read More
High Brightness Addressable RGBW 60 Leds pixel strip

High Brightness Addressable RGBW 60 Leds pixel strip

Leave review
Color
RGBW
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. High Brightness Addressable RGBW 60 Pixel LED Digital Strip

2. DC5V, 20W/M

3. 12mm width White /Black FPCB

4. 60 pcs RGBW LED plus 60 pcs UCS2904 IC chip

5. 2pin / 3pin JST-SM connector

6. 3M adhesive tape on backside of non-waterproof tape

7. Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

1. This high brightness UCS2904 addressable RGBW 60 pixel tapes are incredibly cool that each led is powered by a UCS2904 IC chip that enables them to be individually addressable.

2. Compared to the integrated SK6812 RGBW ones, this external IC chip UCS2904 RGBW LED strip has much higher brightness and much stability than the SK6812 RGBW series .

3. The UCS2904 RGBW led strip conventional color sequence is R-G-B-W, we can set any color sequence like B-G-R-W.

4. There are Warm white 2700K, Neutral White 4500K, Cold white 6500K white CCT to choose.

5. The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

6. If the strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. When you compared this addressable UCS2904 RGBW led strip and the SK6812 RGBW ones, recommend do not choose same program, even they have nearly 90% same protocol.

8. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Read More
24V UCS2904 RGBW 60 Leds pixel strip

24V UCS2904 RGBW 60 Leds pixel strip

Leave review
Color
RGBW
Pixel
6 led/pixel
Protocol
SPI
Voltage
24V

1. 24V UCS2904 RGBW 60 Leds pixel strip

2. DC24V, 20W/M

3. 10mm width White /Black FPCB

4. 6 leds per segment on 10mm width PCB board

5. 60 pcs RGBW LED plus 10 pcs UCS2904 IC chip

6. 2pin / 3pin JST-SM connector

7. 3M adhesive tape on backside of non-waterproof tape

8. Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

1. This strip is 24V UCS2904 4 channel RGBW 60 led digital strips that different with DMX512 RGBW led pixel strips. Actually the protocol is compatible with SK6812 RGBW led tape.

2. Compared to the integrated SK6812 RGBW ones, this external IC chip 24V UCS2904 RGBW 10 pixel 60 LED strip has much higher brightness and much stability.

3. Its advantage is this UCS2904 RGBW digital led strip can play pure white color compared to that classicial WS2811 RGB led strip couldn’t.

4. There are Warm white 2700K, Neutral White 4500K, Cold white 6500K white CCT to choose.

5. Entire strip has 10 pixels ( 40 channels), 60 pcs RGBW leds in a meter with 10mm width pcb board.

6. The 24V UCS2904 RGBW 60 led strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every 3 LED. Solder to the 0.1" copper pads and you're good to go.

7. If the strip does get damaged, it is often one pixel copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

8. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Read More