LED Pixel Tape

We not only have conventional led strip products we offer,but also have customized FPCB led tapes.

There are single color,RGB,RGBW and RGBWW led tapes which cover PWM,SPI, DMX512 LED strips to choose based on your projects.

Also, you can find the hot-seller addressable White,RGB,RGBW LED tapes from DC5V to DC24V at this page. 

If you CAN NOT find the product you are looking for, inquiry us freely. 

Led Pixel Tape

Quick find by:

Filters
Selected
RGBRGBWAddressableSPI5V
Color
Single Color
RGB
RGBW
Pixel
Addressable
3 led/pixel
6 led/pixel
Protocol
PWM
SPI
DMX512
Voltage
5V
12V
24V
Rating
5mm width Addressable 144 Leds RGB Pixel LED tape RGB

5mm width Addressable 144 Leds RGB Pixel LED tape RGB

Leave review
Color
RGB
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. 5mm width Addressable 144 leds RGB Pixel LED strip

2. DC5V, 14W/M

3. 5mm width White /Black FPCB

4. 2pin / 3pin JST-SM connector

5. 3M adhesive tape on backside of non-waterproof tape

6. Neopixel Nano SK6805 2427 RGB LEDs

7.Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

1. This 5mm width Addressable 144 leds RGB Pixel LED strip are incredibly cool that each led is powered by a sk6805 led that enables them to be individually addressable on only 5mm width FPCB. 

2. We choose SK6805 2427 RGB LED which it is an intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 2427 components.

3. The SK6805 2427 LEDs are controlled by shift-registers that are chained up and down the tape so you can shorten or lengthen the tape.

4. SK6805 2427 RGB LED is single digital out pin ,the PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs.

5. The 5mm width Addressable 144 leds RGB Pixel LED strip is made of flexible PCB material on 5mm width, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

6. If the strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. There are 5050 12mm width 144 pixels, 3535 7.2mm wdith 144 pixels digital led tapes to choose.

8. Vivid lighting performance operated by Arduino, Raspberry Pi, Madrix,Artnet/DMX/MADRIX NEBULA.

Read More
Addressable Digital RGB COB LED Pixel Strip

Addressable Digital RGB COB LED Pixel Strip

Leave review
Color
RGB
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. Addressable Digital RGB COB LED Pixel Strip

2. DC5V , 332 LEDs/m

3. 12W/m, CRI>80

4. 10mm width FPCB

5. WS2811/WS2812b/SK6812 RGB protocol compitable

6. 3M adhensive tape on backside of non-waterproof strip

7. Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

1. Amazing, this is Addressable Digital RGB COB LED Pixel Strip. Not the single color COB led strip. 

2. The COB led strips biggest advantage is no glare, beautiful appearance,soft luminous surface, without spot that compared to the classical addressable rgb pixel led strips like ws2812b,sk6812 led strips

3. The LEDs are controlled by shift-registers that are chained up and down the tape so you can shorten or lengthen the tape.

4. SK6812 RGB LED chip is soldering on the PCB directly, on the top, glue the silicone.

5. The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters on the back side of PCB, there are cut-lines .Solder to the 0.1" copper pads and you're good to go.

6. If the strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. For the addressable digital RGB COB led pixel tape, we only have 332 leds/m currently

8. Vivid lighting performance operated by Arduino, Raspberry Pi, Madrix,Artnet/DMX/MADRIX NEBULA.

9. The COB LED strips, consider the high density leds, we do not recommend to choose the IP67 or IP68. 

Read More
5V Addressable 60Leds 5-in-1 RGBTW RGBWW pixel led tape

5V Addressable 60Leds 5-in-1 RGBTW RGBWW pixel led tape

Leave review
Color
RGBW
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. Addressable 5-in-1 RGBTW RGBWW Pixel LED Digital Strip

2. DC5V, 24W/M

3. 12mm width White / Black FPCB

4. Warm white 2700K,Cool white 6500K to choose

5. 60pcs 5-in-1 RGBWW RGBTW LEDs plus 60 pcs TM1936 IC chip

6. 3M adhensive tape on backside of non-waterproof strip

7. Support K-1000C/ K-8000C/ YM-501 /DMX512,Artnet /MADRIX NEBULA to control

8. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc

1. This high addressable 5 colors RGBWW 60 pixel tapes are incredibly cool that each led is powered by a TM1936 IC chip that enables them to be individually addressable.

2. Compared to the integrated SK6812 RGBW ones, this external IC chip TM1936 5-in-1 RGBW LED strip has much higher brightness and much colors available which colors range from warm white 2700K to 6500K.

3. Entire strip has 60 pixels ( 300channels), 60 pcs RGBWW leds in a meter with 12mm width pcb board.

4. There are Warm white 2700K, Cold white 6500K white CCT to choose.Of course, if you need other colors, we are offer to customized.

5. The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

6. If the strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Read More
5V Addressable 30Leds 5-in-1 RGBTW RGBWW pixel led tape

5V Addressable 30Leds 5-in-1 RGBTW RGBWW pixel led tape

Leave review
Color
RGBW
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. Addressable 5-in-1 RGBTW RGBWW Pixel LED Digital Strip

2. DC5V, 12W/M

3. 12mm width White / Black FPCB

4. Warm white 2700K,Cool white 6500K to choose

5. 30pcs 5-in-1 RGBWW RGBTW LEDs plus 30 pcs LPD8806 IC chip

6. 3M adhensive tape on backside of non-waterproof strip

7. Support K-1000C/ K-8000C/ YM-501 /DMX512,Artnet /MADRIX NEBULA to control

8. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc

1. This high addressable 5 colors RGBWW 30 pixel tapes are incredibly cool that each led is powered by a LPD8806 IC chip that enables them to be individually addressable.

2. Compared to the integrated SK6812 RGBW ones, this external IC chip LPD8806 5-in-1 RGBW LED strip has much higher brightness and much colors available which colors range from warm white 2700K to 6500K.

3. Entire strip has 30 pixels ( 150channels), 30 pcs RGBWW leds in a meter with 12mm width pcb board.

4. There are Warm white 2700K, Cold white 6500K white CCT to choose.Of course, if you need other colors, we are offer to customized.

5. The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

6. If the strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Read More
Digital Sk6812 Side View 4020 RGB Pixel Led Strip 60leds/M

Digital Sk6812 Side View 4020 RGB Pixel Led Strip 60leds/M

Leave review
Color
RGB
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. Addressable Digital side emitting RGB Pixel led strip

2. DC5V, 14W/M

3. 10mm width White /Black FPCB

4. 60 leds/72 leds/90 leds/120 leds are available

5. 2pin / 3pin JST-SM connector

6. 3M adhesive tape on backside of non-waterproof tape

7. Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

8.Compatiable with ws2811,WS2812b RGB pixel led strip tape

1. What is better than 020 or 335 side view LEDs? Smart Digital SK6812 side 4020 LED ! These Digital sk6812 Side view 4020 RGB pixel led strip 60leds/m is pixel version . These LED strips are fun and glowy, and you can control each sk6812 side 4020 view LED individually.

2. This is Digital sk6812 Side view RGB pixel led strip 60leds/m with bare board or clearing case and white / black flex pcb, we also have digital sk6812 side 4020 RGB led strips with 72 leds/m, 90 leds/m and 120 leds/m.

3. The LED is “split”, it is side emitting color with 4.0×2.0mm. Lit up these are insanely bright and can be controlled with 8-bit PWM per channel. Great for adding lots of colorful to your project.

4. SK6812 side 4020 LEDS USE 800 KHz protocol so specific timing is required. On ws2812b leds, the PWM RATE IS 400 Hz,which works well but is noticeable if the LED is moving.

5. Compared to other sk6812 (rgbw) series LEDs, SK6812 side 4020 LEDs has 4 pin even it’s quite thin size, and the Pins are almost covered by the LED’s body, it’s hard to replace LED if any of broken, cut the unit 4020 LED on PCB will be a better option.

Read More
High Brightness Addressable RGBW 60 Leds pixel strip

High Brightness Addressable RGBW 60 Leds pixel strip

Leave review
Color
RGBW
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. High Brightness Addressable RGBW 60 Pixel LED Digital Strip

2. DC5V, 20W/M

3. 12mm width White /Black FPCB

4. 60 pcs RGBW LED plus 60 pcs UCS2904 IC chip

5. 2pin / 3pin JST-SM connector

6. 3M adhesive tape on backside of non-waterproof tape

7. Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

1. This high brightness UCS2904 addressable RGBW 60 pixel tapes are incredibly cool that each led is powered by a UCS2904 IC chip that enables them to be individually addressable.

2. Compared to the integrated SK6812 RGBW ones, this external IC chip UCS2904 RGBW LED strip has much higher brightness and much stability than the SK6812 RGBW series .

3. The UCS2904 RGBW led strip conventional color sequence is R-G-B-W, we can set any color sequence like B-G-R-W.

4. There are Warm white 2700K, Neutral White 4500K, Cold white 6500K white CCT to choose.

5. The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

6. If the strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. When you compared this addressable UCS2904 RGBW led strip and the SK6812 RGBW ones, recommend do not choose same program, even they have nearly 90% same protocol.

8. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Read More
APA102C SK9822 60 LEDs Pixel Tape

APA102C SK9822 60 LEDs Pixel Tape

Leave review
Color
RGB
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. Addressable APA102C SK9822 60 Pixel LED Digital Strip

2. DC5V, 14W/M

3. 10mm width White /Black FPCB

4. 3pin / 4pin JST-SM connector

5. 3M adhesive tape on backside of non-waterproof tape

6. Double signal wire with DATA ,CLOCK

7.Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

1. These Addressable APA102C SK9822 60 Pixel LED Digital Strips are incredibly cool that each led is powered by a SK9822 led that enables them to be individually addressable.

2. SK9822 LEDs are 5050-sized LEDs with an embedded microcontroller inside which has double signal wire that we can push data much faster than with the SK6812 RGB ones protocol.

3. SK9822 LEDs have higher PWM refresh rates compared to the sk6812 RGB LEDs, and no specific timing requirements, making it much easier to control.

4. These SK9822 RGB LED is two separate data and clock signals out pin ,LEDs acts like a shift register, reading incoming color data on the input pins, and then shifting the previous color data out on the output pin.

5. The addressable SK9822 RGB 60 LED strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

6. If the SK9822 60 led strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. There not only have 30 pixels to 144 pixels RGB digital led tapes to choose, but also have sk9822 30-144 pixels addressable white led tapes to choose .

8. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Read More
APA102C SK9822 144 LEDs Pixel Tape

APA102C SK9822 144 LEDs Pixel Tape

Leave review
Color
RGB
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. Addressable APA102C SK9822 144 Pixel LED Digital Strip

2. DC5V, 34W/M

3. 10mm / 12mm width White /Black FPCB

4. 3pin / 4pin JST-SM connector

5. 3M adhesive tape on backside of non-waterproof tape

6. Double signal wire with DATA ,CLOCK

7.Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

1. These Addressable APA102C SK9822 144 Pixel LED Digital Strips are incredibly cool that each led is powered by a SK9822 led that enables them to be individually addressable.

2. SK9822 LEDs are 5050-sized LEDs with an embedded microcontroller inside which has double signal wire that we can push data much faster than with the SK6812 RGB ones protocol.

3. SK9822 LEDs have higher PWM refresh rates compared to the sk6812 RGB LEDs, and no specific timing requirements, making it much easier to control.

4. These SK9822 RGB LED is two separate data and clock signals out pin ,LEDs acts like a shift register, reading incoming color data on the input pins, and then shifting the previous color data out on the output pin.

5. The addressable SK9822 RGB 144 LED strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

6. If the SK9822 144 led strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. There not only have 30 pixels to 144 pixels RGB digital led tapes to choose, but also have sk9822 30-144 pixels addressable white led tapes to choose .

8. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Read More
APA102C SK9822 30 LEDs Pixel Tape

APA102C SK9822 30 LEDs Pixel Tape

Leave review
Color
RGB
Pixel
Addressable
Protocol
SPI
Voltage
5V

1. Addressable APA102C SK9822 30 Pixel LED Digital Strip

2. DC5V, 7W/M

3. 10mm width White /Black FPCB

4. 3pin / 4pin JST-SM connector

5. 3M adhesive tape on backside of non-waterproof tape

6. Double signal wire with DATA ,CLOCK

7.Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

1. These Addressable APA102C SK9822 30 Pixel LED Digital Strips are incredibly cool that each led is powered by a SK9822 led that enables them to be individually addressable.

2. SK9822 LEDs are 5050-sized LEDs with an embedded microcontroller inside which has double signal wire that we can push data much faster than with the SK6812 RGB ones protocol.

3. SK9822 LEDs have higher PWM refresh rates compared to the sk6812 RGB LEDs, and no specific timing requirements, making it much easier to control.

4. These SK9822 RGB LED is two separate data and clock signals out pin ,LEDs acts like a shift register, reading incoming color data on the input pins, and then shifting the previous color data out on the output pin.

5. The addressable SK9822 RGB 30 LED strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

6. If the SK9822 30 led strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

7. There not only have 60 pixels to 144 pixels RGB digital led tapes to choose, but also have sk9822 30-144 pixels addressable white led tapes to choose .

8. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Read More