12V 72 Leds DMX512 RGBW Pixel LED Digital Strip

1. DMX512 RGBW RGBWW Pixel 72 LEDs Digital Strip

2. DC12V, 23W/M

3. 12mm / 15mm width FPCB

4. Warm white 3000K, neutral white 4500K, Cool white 6500K to choose

5. 3M adhensive tape on backside of non-waterproof strip

6. Support K-1000C/ K-8000C/ YM-501 /DMX512 control,Artnet to control

7.Standard DMX512 Signal wire digital control interface A,B

8. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc

Color

RGBW

Pixel

3 led/pixel

Protocol

DMX512

Voltage

12V

More Details.

1. This strip is DMX 512 RGBW led digital strips that different with normal SPI led pixel strips. DMX512 led strips protocl is DMX512 that signal is parallel not series.

2. Its advantage is parallel DMX512 signal could avoid RGBW LEDs color influenced by the failure of one light in serial connection.

3. Entire strip has 24 pixels ( 96 channels), 72 pcs RGBW leds in a meter with 12mm /15mm width pcb board.

4. Communication between DMX512 led digital strips are synchronized perfectly under support of Artnet / DMX512 led controllers.

5. DMX512 RGBW led pixel tape strips DMX address need to be set via DMX address coder / controller.

6. Vivid lighting performance operated by Madrix software, Artnet / DMX512 led controllers.

7. 24 pixels 72 leds DMX512 RGBW led strip is flexible , bright, durable and easy for installation.

For bare board strip, you can use the 3M adhensive tape on back; For waterproof silicone tube strip, there shipped with flexible silicon brackets and screws, the brackets fit over the waterproof sheath, it would be used to mount the led strips very well.

8. Also, there are not only 12V 20 pixels 60 leds DMX512 RGBW led strip to choose,but also have 24V 60 leds and 120 leds DMX512 RGBW led strips to offer.

9. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc

Related Products.

YM-501 Pixel LED Multi-function Digital Controller

YM-501 Pixel LED Multi-function Digital Controller

Leave review

1. Multi-function Digital Controller

2. With 4 output ports, each port load 512 pixels,2048 pixels maximum

3. Support DMX512 protocol + SPI /TTL protocl IC chips

4. Connect sub-controllers when product is DMX512 chips that on-line

5. On-line is work with Madrix software

6. Click buttons or remoter to control program models, speed

7. Off-line controller, program saved in SD card, 15 files maximum

8. Widely used in all DMX512 led products projects

1. Multi-function Digital Controller. Two control model: Control online mainly means DMX512; Control offline mainly means normal SPI/TTL IC chips.

2. IP address settings: with LCD display, no DIP switch design, all IP and MAC is set to be completed by the key;

3. Controller with 2G SD card, program saved in SD card for offline playback;

4. Using Fast Ethernet, TCP / IP communication protocol, host connectivity LED controller via standard network cable;

5. Each controller has four output ports, a single port output control 512 pixels;

6. This multip function LED cotroller have master controller function too, that on-line can be cascaded to 16 sub-controllers, 31 units can be cascaded off of control maximum;

7 Grayscale settings: Customers can never light gray under the circumstances to 65,536 (64K) adjust the gray, LED lights let you achieve the best display effect;

8. Brightness adjustment: 100 automatic brightness adjustment function allows you to adjust the display brightness is more effective;

9. EMC design, with good anti-jamming capability;

Color
RGBRGBW
Protocol
SPIDMX512
Read More
DMX512/1990 convert PWM decoder

DMX512/1990 convert PWM decoder

Leave review

1. Supply voltage: 12V-24VDC

2. Output: 3 channels / 4 channels

3. Support RGB / RGBW LED

4. Static power consumption:

5. Output current: each channel 4A

6.Output power: 12V:

7. 3pin XLR Socket,RJ45 interface

1. DMX common controller adopts the advanced micro control unit, it receives standard DMX-512 digital control signal and transformed it into PWM signal for driving LED;

2. You could connect DMX module with DMX digital console to achieve dimming or various changes in procedures.

3. Each DMX common controller occupied 3 / 4 DMX addresses, adopt coding switch set address, it is a Binary numerical code switch which is setting DMX original address code from 1 to 9, 1 is the lowest, and 9 is the highest, 511 address codes could be setted in all.

4. DMX original address code equal aggregate value of the coding switch value from 1 to 9, dial the coding switch upwards (ON is setted 1), the value of bit can be gotten, on the contrary, the value of bit is 0.

5. DMX signal can be received when coding switch FUN(10)-OFF(ON is setted 0).

Color
Single ColorRGBRGBW
Protocol
PWMDMX512
Read More
DMX512 RGBW RGBTW Pixel LED strips DMX address writer

DMX512 RGBW RGBTW Pixel LED strips DMX address writer

Leave review
Color
Single ColorRGBRGBW
Protocol
DMX512

1. This DMX address writer mainly for the DMX512 IC chip pixel LED strips we produce

2. It support standard DMX512 protocol A, B ; signle DMX512 protocol A

3. After DMX address mark ready, program inside can test the address mark if was correct

4. This multi-functional DMX512 address writer no need to connect the addressable cable like PI or PO in led strips

5. Support multi DMX512 IC chips like UCS512, GS8512 ,Hi512,and other DMX512 IC chips

6. Support standard RDM protocol

7. With the color picking function of the color palette, you can select a color value in the palette for control, and support multiple four-color modes

1. This is our new DMX512 address code writer mainly for the DMX512 IC chip pixel LED strips we produce like standard DMX512 A,B or single DMX512 protocol A strips.

2. Different DMX512 IC chip lighting different colors when DMX512 address write ready. Like the DMX512 RGBW led strips play white color.

3. This is new DMX address writer that support multi DMX512 IC chips like UCS512, GS8512 ,Hi512,and other DMX512 IC chips.

4. Compared to the button version DMX address writer, this DMX address writer is touch version. 

5. Finished to write DMX address, we can choose the demo program inside to test the DMX address if was correct . 

6. Support RDM protocol. It support search for RDM lamps, statically detect, write DXM512 address through UID, etc.

7. With the color picking function of the color palette, you can select a color value in the palette for control, and support multiple four-color modes that old verison couldn't. 

Read More
DMX512/1990 convert SPI data pixel decoder

DMX512/1990 convert SPI data pixel decoder

Leave review

1. Standard DMX512 protocol,Address can be set by DIP.

2. This DMX512 decoder can control LED lights based on following driving ICs: LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, UCS2903, TLS3001, TLS3002, WS2801, WS2803, WS2811, P9813 IC etc.

3.Automatically adapt input voltage DC5V-24V.

4.Self-Changing Mode exist.

5. Output is SPI / TTL Signal.

1. The DMX512 Data Decoder adopted the advanced decoding technology to convert the international standard DMX512/1990 signal into standard SPI signals like LPD6803/LPD8806/ TM1809/P9813/TLS3001/WS2801/WS2811/WS2812bTM1814/SK6812 signals.

2. each decoder has 96/510DMX output channels, and the output channels can be expanded by adding decoders.

3. most of LED lights can be controlled by DMX512/1990 protocol via the signal conversion, then widely used pixel light, digital tube light, floodlight, pixel screen, dancing

4. If need any specs, feel free to tell us please

Color
RGBRGBW
Protocol
SPIDMX512
Read More