24V UCS2904 RGBW 60 Leds pixel strip

Led Pixel Tape Leave a comment 2075 Views

1. 24V UCS2904 RGBW 60 Leds pixel strip

2. DC24V, 20W/M

3. 10mm width White /Black FPCB

4. 6 leds per segment on 10mm width PCB board

5. 60 pcs RGBW LED plus 10 pcs UCS2904 IC chip

6. 16 bits dimming curve UCS8904 IC is available

6. 2pin / 3pin JST-SM connector

7. 3M adhesive tape on backside of non-waterproof tape

8. Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

Color

RGBW

Pixel

6 led/pixel

Protocol

SPI

Voltage

24V

Inquiry

More Details.

24V UCS2904 RGBW RGBWW Pixel 60 LED Digital Strip

1. 24V UCS2904 RGBW led digital pixel strip is different with DMX512 led pixel strips and analog RGBW led strips. UCS2904 RGBW led strip has in series signal.
2. UCS2904 RGBW led pixel strip have following advantages that digital RGB led pixel strips do not have.
  - Presence of white LED allows for higher brightness and more color mixing options.
  - 4 colors LED allowing for tones that were previously hard to achieve with single RGB strip.
  - White and RGB can be independently controlled to allows us to create bolder and more vibrant colors than with RGB alone.
3. This UCS2904 RGBW digital led strip can play pure white color compared to that classicial WS2811 RGB led strip couldn’t.
4. There are Warm white 2300K, 2700K, Neutral White 4500K, Cold white 6500K white CCT to choose.
5. UCS2904 is 8 bits dimming. If you need more smooth, 16 bits dimming UCS8904 is recommended to choose.
6. Entire strip has 10 pixels ( 40 channels), 60 pcs RGBW leds in a meter with 10mm width pcb board when connect to DMX controller.
7. No mandatory requirement to connect DMX512 Decoder when connect to DMX equipment based on choose suitable DMX controller that support SPI pixel led strips..
8. 24V UCS2904 RGBW 60 led strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every 6 LED. Solder to the 0.1" copper pads and you're good to go.
9. If the strip does get damaged, it is often one pixel copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.
10. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.
11. Widely used in entertainment, stage,live performance like 3D effects and TV shows, etc.
12. 24V UCS2904 RGBW 60 leds digital pixel tape is offered in both waterproof and non-waterproof versions allowing for both indoor and outdoor applications.