Addressable 60 LEDs Triple White Pixel LED strip

1. Addressable 60 LEDs Triple White Pixel LED strip ( Warm White - White - Cool White)

2. DC5V, 14W/M

3. 10mm width White /Black FPCB

4. 2pin / 3pin JST-SM connector

5. 3M adhesive tape on backside of non-waterproof tape

6. Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet

7. Warm White ( 1800-3000K ) -- Warm White ( 4000 - 4500K ) -- White ( 6000 -7000K )

8. Higher Brightness than the SK6812 WWA LED strip

Color

RGB

Pixel

Addressable

Protocol

SPI

Voltage

5V

More Details.

1. These addressable UCS2909 3-in-1 5050 triple white pixel tape are incredibly cool that each color is powered by a channel of UCS2909 IC that enables them to be individually addressable.

2. What an amazing is there are 3 version white CCT can play in one LED strip, especially they are digital white pixel led strip instead of analog white led strips.

3. The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.

4. There not only have 60 pixels addressable UCS2909 triple white digital led tapes to choose, but also addressable SK6812 WWA series digital white pixel led strips.

5. Compared to the SK6812 WWA White pixel LED strip, SK6812 WWA led strip brightness is a little dimmer than this UCS2909 triple white pixel LED strip

6. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.

Related Products.

YM-501 Pixel LED Multi-function Digital Controller

YM-501 Pixel LED Multi-function Digital Controller

Leave review

1. Multi-function Digital Controller

2. With 4 output ports, each port load 512 pixels,2048 pixels maximum

3. Support DMX512 protocol + SPI /TTL protocl IC chips

4. Connect sub-controllers when product is DMX512 chips that on-line

5. On-line is work with Madrix software

6. Click buttons or remoter to control program models, speed

7. Off-line controller, program saved in SD card, 15 files maximum

8. Widely used in all DMX512 led products projects

1. Multi-function Digital Controller. Two control model: Control online mainly means DMX512; Control offline mainly means normal SPI/TTL IC chips.

2. IP address settings: with LCD display, no DIP switch design, all IP and MAC is set to be completed by the key;

3. Controller with 2G SD card, program saved in SD card for offline playback;

4. Using Fast Ethernet, TCP / IP communication protocol, host connectivity LED controller via standard network cable;

5. Each controller has four output ports, a single port output control 512 pixels;

6. This multip function LED cotroller have master controller function too, that on-line can be cascaded to 16 sub-controllers, 31 units can be cascaded off of control maximum;

7 Grayscale settings: Customers can never light gray under the circumstances to 65,536 (64K) adjust the gray, LED lights let you achieve the best display effect;

8. Brightness adjustment: 100 automatic brightness adjustment function allows you to adjust the display brightness is more effective;

9. EMC design, with good anti-jamming capability;

Color
RGBRGBW
Protocol
SPIDMX512
Read More
2048 pixels K-1000C RGB RGBW pixel led tapes controller

2048 pixels K-1000C RGB RGBW pixel led tapes controller

Leave review

1. SD card offline controller

2. 1-port output 2048 pixels max

3. DC5V-24V working

4. Add a display based on old version

5. Add more IC chips + DMX512 chips

6. Comes with DMX512 chips write address code function

7. 2020 Lededit software

8. Support our all led digital strips, led pixel lights,etc

1. This K-1000c sd card led controller 2048 pixels is evolution of our classic T-1000s + K-1000D two controllers funtion together.

2. The controller has single port output that can support up to 512/2048 pixels lights(DMX lights can support up to 512 pixels).

3. Improve functions that support load lamp is 4 channels (RGBW) pixels, enhanced 485 TTL and 485 differential (DMX) signal output.

4. Controller support chip can lock the support IC in software, or not lock the support IC in the software, select the support IC through the controller CHIP button, more flexible and convenient.

5. Comes with a 256MB SD card included. This version support 2GB sd card that old ones couldn’t.

6. For the DMX lighting IC, the controller comes with write address function; In addition, with use of 2016 LedEdit-K V3.26 or later edition can make one key write address function setting.

7. The controller can single set use,also multiple controllers cascade, cascade optical isolation mode: interference, better stability, cascade distance between two controllers can reach up to 150 meters, need to use 0.5 square meters pure copper power cord.

8. Controller comes with the test effects were as follows: 1 red, green, blue and black jump; 2 red, green, blue and black gradient; 3 red, green, blue and goes.

9.Note: To copy files to SD card, you must first format to the SD card. SD card must be formatted as “FAT” format.

Compatible with wide range of addressable LED chipsets:

TM1803/TM1804/TM1809/TM1812/TM1825/TM1826/TM1829/TA9909/TA9912/TM1913/TM1914

UCS1903/UCS1912/UCS2903/UCS2909/UCS2912/UCS3903/UCS3912/UCS8903/UCS8904

LPD6803/LPD1886/LPD8812/LPD1889

SM16716/SM16726/SM16711/SM16703

WS2811/WS2801/WS2803/WS2812B/WS2813/ws2815/ws2818

LX1003/LX2003/LX2006

INK1003/INK1009

P9813/P9816/D705/9883/P9823

SK6812/SK6812RGBW/SK6822/SK6812mini/SK9822

APA102/APA102C/APA104/APA2020

TLS3001/TLS3008/TLS3100

DMX 500K/DMX 250K-CZF

GS8208/GS8205/GS8206/GS8512

Color
RGBRGBW
Protocol
SPIDMX512
Read More
2048 pixels T-1000S RGB pixel led tapes controller

2048 pixels T-1000S RGB pixel led tapes controller

Leave review

1. SD card offline controller

2. Single-port output 2048 pixels

3. DC5V-24V working

4. Support 256MB sd card

5. Lededit software

6. Control led pixel stripe tapes, led amusement lights

1. The programmable T1000s sd card led controller 2048 pixels makes controlling your LED displays easy. Compatible with wide range of addressable LEDs and DMX signal communication protocol.

2. Perfect addressable LED solution for people who don’t want to programme Arduino or other controllers. No programming code required.

3. Using the programmes LEDedit 2016 or Glediator lets you draw your LED patterns visually, you can specify how the LEDs are arranged, preview them, then upload to an SD card. The SD card plugs into the controller and displays your pattern. You can even upload video for your LEDs to display!

Comes with a 256MB SD card included.

Note: To copy files to SD card, you must first format to the SD card. SD card must be formatted as “FAT” format.

Compatible with wide range of addressable LED chipsets:

TM1803/TM1804/TM1809/TM1812/TM1825/TM1826/TM1829/TA9909/TA9912

UCS1903/UCS1912/UCS2903/UCS2909/UCS2912/UCS3903/UCS3912/UCS8903/UCS8904

LPD6803/LPD1886/LPD1882/LPD1889/LPD6812/LPD6813/LPD8806/LPD8809

SM16716/SM16726/SM16711/SM16703

WS2811/WS2801/WS2803/WS2812B/WS2813/ws2815/ws2818

LX1003/LX2003/LX2006

INK1003/INK1009

P9813/P9816/D705/P9823

SK6812/SK6822/SK6812mini/SK9822

APA102/APA102C/APA104/APA2020

TLS3001/TLS3008/TLS3100

Color
RGB
Protocol
SPI
Read More
DMX512/1990 convert SPI data pixel decoder

DMX512/1990 convert SPI data pixel decoder

Leave review

1. Standard DMX512 protocol,Address can be set by DIP.

2. This DMX512 decoder can control LED lights based on following driving ICs: LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, UCS2903, TLS3001, TLS3002, WS2801, WS2803, WS2811, P9813 IC etc.

3.Automatically adapt input voltage DC5V-24V.

4.Self-Changing Mode exist.

5. Output is SPI / TTL Signal.

1. The DMX512 Data Decoder adopted the advanced decoding technology to convert the international standard DMX512/1990 signal into standard SPI signals like LPD6803/LPD8806/ TM1809/P9813/TLS3001/WS2801/WS2811/WS2812bTM1814/SK6812 signals.

2. each decoder has 96/510DMX output channels, and the output channels can be expanded by adding decoders.

3. most of LED lights can be controlled by DMX512/1990 protocol via the signal conversion, then widely used pixel light, digital tube light, floodlight, pixel screen, dancing

4. If need any specs, feel free to tell us please

Color
RGBRGBW
Protocol
SPIDMX512
Read More