COB Single color LED Strip

1. COB Single color LED Strip

2. DC5V / DC12V / DC24V , 528 LEDs/m

3. 11W/m, CRI>80 or CRI>90

4. 8mm width FPCB

5. White/RED/BLUE/GREEN/YELLOW/UV LEDs are available

6. 3M adhensive tape on backside of non-waterproof strip

7. Support PWM LED controller can achieve uniform color temperature and brightness adjustment

Color

Single Color

Pixel

6 led/pixel

Protocol

PWM

Voltage

24V

More Details.

1. This is COB Single color LED Strip 528 LEDs tape. Not digital led strip, only analog single color. 

2. The matched control system can achieve uniform color temperature and brightness adjustment. 

3. The COB led strips biggest advantage is no glare, beautiful appearance,soft luminous surface, without spot that compared to the classical single color led strips like 5050,2835 ,even 2110 led strips

4. For the White LEDs, there are 2200K to 10,000K white CCT to choose. 

5. CRI>80,CRI>90 are available to offer.

6. There are 320 leds, 384 leds COB LED strips to choose.

7. Amazing is we also have addressable rgb pixel COB led strip.

8. Integrated package solution for more uniform and consistent light mixing

9. Wide range of illumination for more compact lighting space.

10. For white color, high color consistency, within 5 steps SDCM(3 steps Optional).

11. The COB LED strips, consider the high density leds, we do not recommend to choose the IP67 or IP68. 

12. If there was defctive leds, you just cut the segment based on the pads, then solder it.

Related Products.

Pixel LED Multi-function Digital Slave Controller

Pixel LED Multi-function Digital Slave Controller

Leave review

1. Multi-function Digital LED slave Controller

2. With 4 output ports, each port load 512 pixels,2048 pixels maximum

3. Support DMX512 protocol + SPI /TTL protocl IC chips

4. Connect main-controllers to work together

5. On-line is work with Madrix software

6. Off-line controller, program saved in SD card, 15 files maximum

7. Widely used in all DMX512 led products projects

8. There are 8 ports LED slave controller to choose

1. Multi-function Digital Controller. Two control model: Control online mainly means DMX512; Control offline mainly means normal SPI/TTL IC chips.

2. IP address settings on the main controller;

3. Controller with 2G SD card, program saved in SD card for offline playback;

4. Using Fast Ethernet, TCP / IP communication protocol, host connectivity LED controller via standard network cable;

5. Each slave controller has four output ports, a single port output control 512 pixels;

Color
RGBRGBW
Protocol
SPIDMX512
Read More
SP107E Bluetooth LED Music Pixel Controller

SP107E Bluetooth LED Music Pixel Controller

Leave review
Color
RGBRGBW
Protocol
SPIDMX512

1. Long distance APP remote control via Blutooth

2. Support almost every kind of one-wire or two-wires LED driver IC

3. Support setting pixel number and segment number, support up to 960 pixels

4. With 18 kinds of LED strip music effects, 30 kinds of LED matrix music effects and 180 kinds of non-music effects

5. DC5V~24V wide range working voltage, reverse power supply input protection

6. User setting saving

1. Download and install the APP:
Both IOS version and Android OS version are available. (hardware should support Bluetooth)
•Requires IOS version 10.0 or later;
•Requires Android OS version 4.4 or later;
•Search “LED Chord” in App Store or Google Play or scan this QR code to download and install the APP;

2. Instructions:
APP Operatings:
1.Make sure you have turn on Bluetooth on your phone;
2.Open the APP, drag to refresh the device list, select device name “SP107E” to connect the controller, once connected you will able to rename your
controller;
3.Select RGB order and IC type;
4.Adjust pixel number;
5.Press ENTER.
Audio Input:
There are two ways to input the audio signal on SP107E, AUX IN and Build-IN microphone;
•AUX IN: Plug the supplied audio split cable into the “AUX IN” jack, connect the audio output source(MP3,Phone or tablet…)and the speaker(or
headset), controller will automatically switch into AUX input mode;
•MIC: Disconnect the audio cable, controller will automatically switch into microphone input mode.

Read More
2048 pixels T-1000S RGB pixel led tapes controller

2048 pixels T-1000S RGB pixel led tapes controller

Leave review

1. SD card offline controller

2. Single-port output 2048 pixels

3. DC5V-24V working

4. Support 256MB sd card

5. Lededit software

6. Control led pixel stripe tapes, led amusement lights

1. The programmable T1000s sd card led controller 2048 pixels makes controlling your LED displays easy. Compatible with wide range of addressable LEDs and DMX signal communication protocol.

2. Perfect addressable LED solution for people who don’t want to programme Arduino or other controllers. No programming code required.

3. Using the programmes LEDedit 2016 or Glediator lets you draw your LED patterns visually, you can specify how the LEDs are arranged, preview them, then upload to an SD card. The SD card plugs into the controller and displays your pattern. You can even upload video for your LEDs to display!

Comes with a 256MB SD card included.

Note: To copy files to SD card, you must first format to the SD card. SD card must be formatted as “FAT” format.

Compatible with wide range of addressable LED chipsets:

TM1803/TM1804/TM1809/TM1812/TM1825/TM1826/TM1829/TA9909/TA9912

UCS1903/UCS1912/UCS2903/UCS2909/UCS2912/UCS3903/UCS3912/UCS8903/UCS8904

LPD6803/LPD1886/LPD1882/LPD1889/LPD6812/LPD6813/LPD8806/LPD8809

SM16716/SM16726/SM16711/SM16703

WS2811/WS2801/WS2803/WS2812B/WS2813/ws2815/ws2818

LX1003/LX2003/LX2006

INK1003/INK1009

P9813/P9816/D705/P9823

SK6812/SK6822/SK6812mini/SK9822

APA102/APA102C/APA104/APA2020

TLS3001/TLS3008/TLS3100

Color
RGB
Protocol
SPI
Read More
DMX512/1990 convert SPI data pixel decoder

DMX512/1990 convert SPI data pixel decoder

Leave review

1. Standard DMX512 protocol,Address can be set by DIP.

2. This DMX512 decoder can control LED lights based on following driving ICs: LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, UCS2903, TLS3001, TLS3002, WS2801, WS2803, WS2811, P9813 IC etc.

3.Automatically adapt input voltage DC5V-24V.

4.Self-Changing Mode exist.

5. Output is SPI / TTL Signal.

1. The DMX512 Data Decoder adopted the advanced decoding technology to convert the international standard DMX512/1990 signal into standard SPI signals like LPD6803/LPD8806/ TM1809/P9813/TLS3001/WS2801/WS2811/WS2812bTM1814/SK6812 signals.

2. each decoder has 96/510DMX output channels, and the output channels can be expanded by adding decoders.

3. most of LED lights can be controlled by DMX512/1990 protocol via the signal conversion, then widely used pixel light, digital tube light, floodlight, pixel screen, dancing

4. If need any specs, feel free to tell us please

Color
RGBRGBW
Protocol
SPIDMX512
Read More