Flexible SK9822 LED Matrix 8×8- 64 RGB LED Pixels

1. 8 x 8 pcs SK9822 RGB LEDs in 80 x 80mm flexible board

2. 10mm pixel pitch

3. DC5V, 15W

4. 4pin JST-SM connector

5. Support T-1000s, K-1000c,Arduino,Glediator,DMX512,Artnet to control

6. Widely used in entertainment, stage, live performance,etc

Color

Single Color

Pixel

Addressable

Protocol

SPI

Voltage

5V

More Details.

1. For SK9822 RGB led, now have bendable apa102c flexible led rgb pixel matrix! Control all 64 ultra bright LEDs, set each LEDs as you wish to scroll message or draw little images.

2. This SK9822 RGB 8×8 led matrix has a thick flexible PCB backing that can be gently bent and curved around surfaces. And also, they are the same integrated LEDs that used in our addressable apa102c led pixel tapes.

3. 8×8 flexible pixel matrix has 8 pixels in each of its 8 lines, 64 LEDs in total. This is a continuous strip of leds making it easy to program for displays and is flexible so can be wrapped around objects and works with a 5v power supply.

4. Don’t forget, with 64LEDs, you could use over 3A of current if turn on all the LEDs on to white which we really don’t recommend.

5. 8 x 8 flexible matrix has two 4pin JST-SM conductor cables contains 1 JST-SM 4pin output side and 1 JST-SM 4pin input side.

Thanks to the connectors, multiple SK9822 RGB 8×8 flexible led rgb pixel matrix could be chained, as many as you wish, just watch for how much current they need. We recommend supply power to each panel when you links many piece.

Note: all ll flexible matirx are note designed for repeated flexing.

Related Products.

SP901E Pixel LED Digital TTL SPI Signal Amplifier

SP901E Pixel LED Digital TTL SPI Signal Amplifier

Leave review
Color
RGBRGBW
Protocol
SPIDMX512

1. SPI / DMX512 TTL SPI signal Amplifier

2. Support almost every kind of one-wire or two-wires LED driver IC

3. Support setting pixel number and segment numbers based on the Main controller

4. DC5V~24V wide range working voltage, reverse power supply input protection

5.This Signal Amplifier control model is depends on the main controller

6.It can work with K-1000C, SP108E, SP107E, CSY08, CSY07, Raspberry pi, Arduino X2 music controller,etc

1. This SPI / DMX512 signal amplifier is compatible with all kinds of 5V-TTL signal dual signals. It receives one signal and simultaneously output 4 or 8 channels of signals. Each channel can control the same quantity of LED pixels as main controller.

2. It can output 8 channels for addressable LED strip with single data wire, such as WS2812B, WS2811, SK6812RGB, SK6812-RGBW,UCS2904, etc. It can output 4 channels for addressable LED strip with data & clock wires WS2801, APA102, SK9822 or dual data wires, such as GS8208, WS2815.

3. DC5V~24V wide range of working voltage, but it cannot regulate the output voltage. That means the output voltage of power supply must be the same as the work voltage of your LED lights. The current through the amplifier is limited, when the current consumed is high, you need to add the power supply of the corresponding voltage.

4. Multiple signal amplifiers can be cascaded together synchronously. Particularly suitable for small and medium dream color lighting projects. It can work with K-1000C, SP108E, SP107E, CSY08, CSY07, Raspberry pi, Arduino X2 music controller,etc.

5. This Signal Amplifier control the IC chip version like SK6812 or DMX512  , pixels qty, RGB color sequence, program modles are all based on the Main controller. 

6. The controller cannot regulate the output voltage at the VCC. That means the output voltage of your power supply must be the same as the work voltage of your LED lights. If your lights need 5V input, please use a 5V power supply, don't use higher than 5V power supply

7. The current through the amplifier is limited, when the consumption current is higher, you need to add power supply of the corresponding voltage additionally.

 

Read More
YM-501 Pixel LED Multi-function Digital Controller

YM-501 Pixel LED Multi-function Digital Controller

Leave review

1. Multi-function Digital Controller

2. With 4 output ports, each port load 512 pixels,2048 pixels maximum

3. Support DMX512 protocol + SPI /TTL protocl IC chips

4. Connect sub-controllers when product is DMX512 chips that on-line

5. On-line is work with Madrix software

6. Click buttons or remoter to control program models, speed

7. Off-line controller, program saved in SD card, 15 files maximum

8. Widely used in all DMX512 led products projects

1. Multi-function Digital Controller. Two control model: Control online mainly means DMX512; Control offline mainly means normal SPI/TTL IC chips.

2. IP address settings: with LCD display, no DIP switch design, all IP and MAC is set to be completed by the key;

3. Controller with 2G SD card, program saved in SD card for offline playback;

4. Using Fast Ethernet, TCP / IP communication protocol, host connectivity LED controller via standard network cable;

5. Each controller has four output ports, a single port output control 512 pixels;

6. This multip function LED cotroller have master controller function too, that on-line can be cascaded to 16 sub-controllers, 31 units can be cascaded off of control maximum;

7 Grayscale settings: Customers can never light gray under the circumstances to 65,536 (64K) adjust the gray, LED lights let you achieve the best display effect;

8. Brightness adjustment: 100 automatic brightness adjustment function allows you to adjust the display brightness is more effective;

9. EMC design, with good anti-jamming capability;

Color
RGBRGBW
Protocol
SPIDMX512
Read More
Pixel LED Multi-function Digital Slave Controller

Pixel LED Multi-function Digital Slave Controller

Leave review

1. Multi-function Digital LED slave Controller

2. With 4 output ports, each port load 512 pixels,2048 pixels maximum

3. Support DMX512 protocol + SPI /TTL protocl IC chips

4. Connect main-controllers to work together

5. On-line is work with Madrix software

6. Off-line controller, program saved in SD card, 15 files maximum

7. Widely used in all DMX512 led products projects

8. There are 8 ports LED slave controller to choose

1. Multi-function Digital Controller. Two control model: Control online mainly means DMX512; Control offline mainly means normal SPI/TTL IC chips.

2. IP address settings on the main controller;

3. Controller with 2G SD card, program saved in SD card for offline playback;

4. Using Fast Ethernet, TCP / IP communication protocol, host connectivity LED controller via standard network cable;

5. Each slave controller has four output ports, a single port output control 512 pixels;

Color
RGBRGBW
Protocol
SPIDMX512
Read More
DMX512/1990 convert PWM decoder

DMX512/1990 convert PWM decoder

Leave review

1. Supply voltage: 12V-24VDC

2. Output: 3 channels / 4 channels

3. Support RGB / RGBW LED

4. Static power consumption:

5. Output current: each channel 4A

6.Output power: 12V:

7. 3pin XLR Socket,RJ45 interface

1. DMX common controller adopts the advanced micro control unit, it receives standard DMX-512 digital control signal and transformed it into PWM signal for driving LED;

2. You could connect DMX module with DMX digital console to achieve dimming or various changes in procedures.

3. Each DMX common controller occupied 3 / 4 DMX addresses, adopt coding switch set address, it is a Binary numerical code switch which is setting DMX original address code from 1 to 9, 1 is the lowest, and 9 is the highest, 511 address codes could be setted in all.

4. DMX original address code equal aggregate value of the coding switch value from 1 to 9, dial the coding switch upwards (ON is setted 1), the value of bit can be gotten, on the contrary, the value of bit is 0.

5. DMX signal can be received when coding switch FUN(10)-OFF(ON is setted 0).

Color
Single ColorRGBRGBW
Protocol
PWMDMX512
Read More